Briggs & Stratton 2700PSI owner manual Add Engine Oil, Install Oil Dipstick on Pump Add Gasoline

Page 6

Snapper 2700 PSI Pressure Washer

Figure 2 — Secure Handle

•Insert the “L” bolt through the hole on the right side of the handle (viewing from rear of unit) and attach the plastic knob (Figure 2). Tighten the knob by hand. If not installed, add the vinyl cap to the “L” bolt.

•Insert the multi–colored nozzles in the spaces provided in the handle.

• Install the oil dipstick.

NOTE: The pump is pre-lubricated and sealed, requiring no additional lubrication for the life of the pump.

Add Engine Oil

IMPORTANT: Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure.

•Place pressure washer on a level surface.

•Refer to the engine owners manual to add recommended oil to engine.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

Install Oil Dipstick on Pump

 

Add Gasoline

 

 

WARNING! Never fill fuel tank indoors. Never

CAUTION! You MUST remove the pump’s shipping cap

 

and install the oil dipstick. Failure to do so will void the

 

fill fuel tank when engine is running or hot. Allow unit

 

to cool for two minutes before refueling. Do Not

warranty and damage the pump.

 

 

light a cigarette or smoke when filling the fuel tank.

 

 

To install the oil dipstick:

•

Make sure your unit is on a level surface.

 

WARNING! Do Not overfill the fuel tank.

 

Always allow room for fuel expansion.

 

•

Remove and discard the shipping cap located on the

 

 

•

Use regular UNLEADED gasoline with the pressure

 

pump (Figure 3).

 

 

Figure 3 — Install Oil Dipstick onto the Pump

 

washer engine. Do Not use premium gasoline. Do Not

 

 

mix oil with gasoline.

 

 

 

 

 

 

 

 

 

Remove shipping cap and

Shipping Cap

•

Clean area around fuel fill cap, remove cap.

 

 

install oil dipstick here.

 

•

Slowly add "UNLEADED" regular gasoline to fuel tank.

 

 

 

 

Use a funnel to prevent spillage. Slowly fill tank to about

 

 

 

 

1.5" below the bottom of the filler neck (Figure 4).

 

 

 

 

Figure 4 — Typical Fuel Expansion Space

 

 

 

 

 

 

SpaceAir

Tank

 

 

 

 

 

 

 

 

 

 

 

1.5”

 

Fuel

 

 

 

 

 

 

 

 

 

•

Install fuel cap and wipe up any spilled gasoline.

 

Pump Oil

 

 

 

 

 

 

Dipstick

 

 

 

 

 

 

 

 

6

 

 

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Contact the Local Snapper Service Center 2700PSITable of Contents Safety RulesEquipment Description High pressure spray may damage fragile items including glass Nozzle Extension with Quick Connect Allows you to Know Your Pressure WasherHigh Pressure Outlet with Quick Connect To Connect high pressure hoseWasher for USE Carton ContentsRemove Pressure Washer from Carton Attach Handle to the Pressure WasherInstall Oil Dipstick on Pump Add Gasoline To install the oil dipstickAdd Engine Oil Checklist Before Starting Engine Connect Hose and Water Supply to PumpHOW to USE Your Pressure Washer How to Start Your EngineFollow these instructions to change nozzles How to Stop Your Pressure WasherHow to Use the Nozzles Low PressureCleaning and Applying Chemical Pressure Washer Rinsing Automatic Cool Down SystemTo apply detergent follow these steps Specifications General Maintenance RecommendationsPressure Washer Maintenance Check In-Line Filter Nozzle MaintenanceCheck Gun and Nozzle Extension Purge Pump of Air ContaminantsPreparing the Unit for Storage Storing the Engine Engine MaintenanceRing Maintenance To remove a worn or damaged o-ringSnapper 2700 PSI Pressure Washer Troubleshooting Exploded View Unit Parts List Unit Qty DescriptionExploded View Pump Parts List Pump Service KitsExploded View Unloader Parts List Unloader Snapper 2700 PSI Pressure Washer Snapper 2700 PSI Pressure Washer Snapper Owner Warranty Policy Effective October 1 Generac Portable Products, LLC Jefferson, Wisconsin U.S.A

2700PSI specifications

The Briggs & Stratton 2700PSI pressure washer is an outstanding choice for both residential and light commercial cleaning tasks. Known for its robust design and powerful performance, this pressure washer delivers a maximum pressure of 2700 PSI and a water flow rate of 2.3 GPM, making it capable of tackling a wide range of cleaning jobs, from driveways to decks and patios.

A key feature of the Briggs & Stratton 2700PSI is its reliable engine. Powered by a Briggs & Stratton OHV engine, this pressure washer provides enhanced durability and efficiency. The engine operates smoothly and is designed for easy starting, thanks to its patented Ready Start technology, which eliminates the need for a primer bulb. Users can expect hassle-free operation, reducing the frustration often associated with starting gas-powered equipment.

In terms of versatility, the 2700PSI model offers five interchangeable nozzles, allowing users to adjust the spray pattern according to the specific cleaning task at hand. Ranging from a focused, high-pressure stream to a wide, gentle spray, these nozzles ensure that users can clean delicate surfaces without causing damage while still achieving superior cleaning performance on tough stains.

One of the standout features of this pressure washer is its onboard detergent tank. This built-in tank allows for easy application of soap, making it ideal for breaking down grime and dirt on heavily soiled surfaces. The pressure washer also includes a soap nozzle, optimizing soap application for effective cleaning results.

The Briggs & Stratton 2700PSI is designed with user convenience in mind. It comes equipped with a 25-foot high-pressure hose, providing ample reach for various cleaning tasks without the need to constantly move the machine. Additionally, its compact and lightweight design, along with sturdy wheels, enhances portability, making it easy to transport and store when not in use.

Safety features are also integrated into the design of this pressure washer. The total stop system automatically shuts off the pump when the trigger is not engaged, prolonging the lifespan of the motor and pump while conserving energy.

Overall, the Briggs & Stratton 2700PSI pressure washer stands out as a powerful and efficient cleaning solution. With its reliable engine, versatile nozzles, onboard detergent tank, and thoughtful safety features, it represents a great investment for anyone looking to maintain their outdoor spaces with ease and effectiveness. Whether washing vehicles, cleaning siding, or prepping surfaces for painting, this pressure washer is equipped to handle the job efficiently, making it a popular choice among homeowners and professionals alike.
Top Page Image Contents