Briggs & Stratton 20263 manual Assembly Section, Preparing Pressure Washer for USE

Page 7

Assembly Section

3

ASSEMBLY

IMPORTANT: Read entire operator’s manual before you attempt to assemble or operate your new pressure washer.

Unpacking the Pressure Washer

1.Remove the parts bag, accessories, and inserts included with pressure washer.

2.Slice two corners at the end of carton from top to bottom so the panel can be folded down flat.

3.Remove pressure washer from carton.

Carton Contents

Items in the carton include:

•Main Unit

•Safety Goggles

•Handle with Chemical Reservoir Assembly

•High Pressure Hose

•Spray Gun

•Nozzle Extension with Quick Connect Fitting

•Plastic Accessory Tray

•Oil Bottle

•Parts Bag (which includes the following):

•Operator’s Manual

•Engine Operator’s Manual

•Owner’s Registration Card

•Bag containing 4 multi–colored ProjectPro™ Nozzles

•Maintenance Kit

•Handle/Tray Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•“L” Bolt

•Plastic Knobs (3)

•Tree Clips (4)

If any of the above parts are missing or damaged, call the pressure washer helpline at 1–800–743–4115.

PREPARING PRESSURE WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-743-4115.

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle with chemical reservoir assembly to main unit.

3.Connect chemical hose to pump.

4.Add oil to engine crankcase.

5.Add fuel to fuel tank.

6.Connect high pressure hose to spray gun and pump.

7.Connect water supply to pump.

8.Attach nozzle extension to spray gun.

9.Select/attach quick connect ProjectPro™ nozzle to nozzle extension.

Attach Handle and Accessory Tray

1.Place handle assembly onto handle supports connected to main unit. Make sure holes in handle align with holes on handle supports (Figure 1).

Figure 1 — Attach Handle to Base

Handle

Align Holes

Handle

Supports

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 020263 3100 PSI Safety Rules Table of ContentsEquipment Description Operate pressure washer only outdoors When Adding FuelUnintentional sparking can result in fire or electric shock High pressure spray may damage fragile items including glass Nozzle Extension with Quick Connect Allows you to Section Features and ControlsSafety Goggles not shown Always use the enclosed Know Your Pressure WasherAssembly Assembly SectionPreparing Pressure Washer for USE Attach chemical hose to chemical injection fitting on pump AssemblyAttach Chemical Hose to Pump Add Engine Oil and FuelNot use if Checklist Before Starting EngineConnect Hose and Water Supply to Pump HereTo Start Your Pressure Washer HOW to USE Pressure WasherSection Operation Pressure Washer LocationOperation How to Stop Your Pressure WasherSafety Latch Engage trigger lock on spray gun when not in useEngage trigger lock on spray gun How to Use Accessory TrayHow to Use ProjectPro Nozzle System Follow these instructions to change ProjectPro nozzlesDelicate ProjectPro nozzle Figure Rust removal or other stubborn substances tarPatio furniture, lawn equipment, etc., select yellow Gum, grease, wax, etc., select red MaxThermal Relief Cleaning and Applying DetergentPressure Washer Rinsing Automatic Cool Down SystemPressure Washer Maintenance Maintenance SectionSpecifications General Maintenance RecommendationsRing Maintenance MaintenanceEngine Maintenance Nozzle MaintenanceProtecting the Pump StoragePreparing Unit for Storage Storing the EngineTroubleshooting TroubleshootingProblem Cause Correction Page Page Limited Warranty Reglas DE Seguridad Reglas de SeguridadTabla DE Contenidos Descripción DEL EquipoCuando Añada Combustible Sección 1 Reglas de SeguridadCuando Pruebe LA Bujía DEL Motor Precaución Conozca SU Maquina Lavadora a Presion Características y ControlesMontaje MontajePreparando EL Lavador a Presión Para SU USO Coloque la lavadora a presión sobre una superficie nivelada Sección 3 MontajeMontaje de Manguera de Productos Químicos a Bomba Agregar Aceite al Motor y GasolinaProporcione el suministro de agua adecuado Conecte la Manguera y el Suministro de Agua a la BombaLista de Revision Previa al Arranque del Motor Deposite la gasolina adecuada en el tanque del combustibleCómo Darle Arranque a su Lavadora a Presión OperaciónCómo Usar SU Lavadora a Presión Ubicación del Lavadora a PresiónCómo Parar su Lavador a Presión Sección 4 OperaciónEl Pasador de la Seguridad La Presión Alta Utilización de la Bandeja de AccesoriosCómo Usar el Sistema de Boquillas ProjectPro La Presión BajaFigura 39 Boquilla Suave Elija la boquilla ProjectPro que deseeOn Posición Off Posición Limpieza y Aplicación del QuímicoEnjuage de la Máquina Lavadora a Presión Sistema de Enfriamiento Automático Alivio TérmicoAntes de Cada Uso MantenimientoEspecificaciones Recomendaciones GeneralesMantenimiento de los Anillos O Sección 5 MantenimientoMantenimiento DEL Motor Mantenimiento de la BoquillaProteger la Bomba Sección 6 AlmacenamientoPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorReparacion DE Daños Diagnosticos de AveríasNotas Garantía Limitada

20263 specifications

Briggs & Stratton 20263 is a powerful and efficient engine model known for its reliability and performance in a variety of outdoor applications. This engine is particularly popular for use in lawn mowers, pressure washers, and other outdoor power equipment, thanks to its robust design and advanced features that make it a preferred choice among both homeowners and professionals.

One of the standout features of the Briggs & Stratton 20263 engine is its overhead valve (OHV) technology. This design provides better airflow and enhances fuel efficiency, allowing the engine to deliver more power while consuming less fuel. This efficiency not only reduces operational costs but also minimizes emissions, making it an environmentally friendly option.

Additionally, the 20263 model is equipped with a recoil start mechanism and an integrated fuel system, which ensures easy starting and smooth operation. The engine’s 206 cc displacement provides ample power for tough tasks, and the high torque output allows it to maintain performance under heavy loads.

The construction of the Briggs & Stratton 20263 engine is designed to withstand harsh conditions. It features a durable cast iron sleeve that enhances the engine's longevity and reduces wear over time. Furthermore, the engine is equipped with a dual-sealed air filter that helps protect the internal components from dust and debris, ensuring consistent performance and reliability.

Another remarkable characteristic of the 20263 model is its low vibration technology. This feature helps reduce operator fatigue, making it more comfortable to use for extended periods. The engine is also designed to operate quietly, significantly minimizing noise pollution, which is especially important for residential areas.

Moreover, the Briggs & Stratton 20263 engine supports a variety of attachments and accessories, making it versatile for numerous outdoor applications. Whether you need an engine for lawn care or cleaning, its comprehensive compatibility is a significant advantage.

In summary, the Briggs & Stratton 20263 engine combines power, efficiency, and durability. With its innovative technologies, ease of use, and reliable performance, it stands out as a top choice for anyone in need of a robust outdoor power solution.
Top Page Image Contents