Briggs & Stratton 01936 owner manual Troubleshooting, Problem Cause Correction

Page 16

Pressure Washer

TROUBLESHOOTING

	Problem	Cause		Correction
		1.	Nozzle in low pressure mode.	1.	Pull nozzle backward for high
					pressure mode.
		2.	Water inlet is blocked.	2.	Clear inlet.
		3.	Inadequate water supply.	3.	Provide adequate water flow.
	Pump has following problems:	4.	Inlet hose is kinked or leaking.	4.	Straighten inlet hose, patch leak.
	Pump has following problems:	5.	Clogged inlet hose strainer.	5.	Check and clean inlet hose
	failure to produce pressure,	5.	Clogged inlet hose strainer.	5.	Check and clean inlet hose
	failure to produce pressure,				strainer.
	erratic pressure, chattering, loss				strainer.
	erratic pressure, chattering, loss	6.	Water supply is over 100°F.	6.	Provide cooler water supply.
	of pressure, low water volume.	6.	Water supply is over 100°F.	6.	Provide cooler water supply.
		7.	High pressure hose is blocked or	7.	Clear blocks in outlet hose.
			leaks.
		8.	Gun leaks.	8.	Replace gun.
		9.	Nozzle is obstructed.	9.	Clean nozzle.
		10.	Pump is faulty.	10.	Contact Briggs and Stratton
					Power Products service facility.

		1.	Detergent siphoning tube is not	1.	Insert detergent siphoning tube
			submerged.		into detergent.
		2.	Chemical filter is clogged or	2.	Clean or replace filter/detergent
	Detergent fails to mix with spray.		cracked.		siphoning tube.
	Detergent fails to mix with spray.
		3.	Dirty in-line filter.	3.	See "Check In-Line Filter".
		4.	Nozzle is in high pressure mode.	4.	Push nozzle forward for low
					pressure mode.

	Engine runs good at no-load but	Engine speed is too slow.		Move throttle control to FAST
	Engine runs good at no-load but			position. If engine still "bogs down",
	"bogs" when load is added.			contact Briggs and Stratton service
				facility.

	Pressure washer stops during	Out of fuel.		Fill fuel tank.
	operation.

16

Image 16

Contents 01805 2500 PSI 01806 2650 PSI 01936 2550 PSI Table of Contents Safety RulesHazard Symbols and Meanings Equipment DescriptionWhen Transporting or Repairing Equipment High pressure spray may damage fragile items including glass Assembly Preparing Pressure Washer for USERemove Pressure Washer From Carton Attach Handle to UnitInstall J Hook on Accessory Tray Add Fuel Add Engine OilTo attach handle supplied with two L hooks Model Connect Hose and Water Supply to Pump Checklist Before Starting EngineModel HOW to USE Your HOW to USE NozzlesHow to Start Pressure Washer How to Stop Pressure WasherIf Unit is Equipped with Adjustable Nozzle Cleaning and Applying ChemicalFollow these instructions to change spray tips To apply detergent follow these stepsCleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal Relief Discharging the warm water onto the groundGeneral Maintenance Recommendations Pressure Washer MaintenanceNozzle Maintenance Adjustable nozzleOrifice Quick-connect spray tipsEngine Maintenance Ring MaintenancePump Maintenance Purge Pump of Air ContaminantsPreparing the Unit for Storage Storing the EngineTroubleshooting Problem Cause CorrectionOUR Equipment Tabla DE Contenidos Descripción DEL EquipoInstrucciones DE Seguridad AdvertenciaPeligro Cuando Añada CombustiblePrecaución Montaje Preparando EL Lavador a Presión Para SU USORemueva el Lavador a Presión del Empaque Conecte el ManubrioPara Conecte el Manubrio con Dos Perno L Modelo Gancho del PistolaAñada Gasolina Agregar Aceite al MotorConecte la Manguera y el Suministro de Agua a la Bomba Modelo Lista DE Revision Previa AL Arranque DEL Motor01806 Cómo Usar SU Lavadora a Presión Cómo Usar LAS BoquillasCómo Darle Arranque a su Lavadora a Presión Cómo Detener su Lavadora a PresiónSi la Unidad Está Equipada con la Boquilla Regulable Limpieza y Aplicación del QuímicoPara cambiar las boquillas Detergentes caseros podrían dañar la bombaEnjuage de la Máquina Lavadora a Presión Limpiando el Tubo de Sifón del DetergenteSistema de Enfriamiento Automático Alivio Térmico Lave de 1 a 2 minutosRecomendaciones Generales Mantenimiento DE LA Lavadora a PresionElimine el Aire y los Contaminantes de la Bomba Mantenimiento de los Anillos OBoquillas con conector rápido Para retirar el aire de la bomba, siga los siguientes pasosMantenimiento DEL Motor Preparando LA Unidad Para SU AlmacenamientoAlmacenando EL Motor Mantenimiento de la BombaReparacion DE Averias Garantía Limitada 01936 2550 PSI Exploded View and Parts List Main Unit PSI Pressure WasherDescription Items Not Illustrated DescriptionExploded View and Parts List Pump Include all parts shown within the box