Description, Safety Guidelines | Wayne ESP15 instruction

! NOTICE

been discharged. If electrical power to the house is lost more than once a week, consider keeping a spare, fully- charged battery to replace an exhausted battery for the standby sump pump.

Installation

! NOTICE Installation of this unit may take

several hours. Before disabling your main pump, have ready an appropriate means of evacuating the sump.

1. Turn power to main pump off.

2. Pump must be installed using 11/4” or 11/2” rigid PVC piping. A check valve (not included) must be installed between the ESP’s tee and the main pump (see Figure 1).

Operating Instruction and Parts Manual	ESP15

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

12Volt

Standby Sump Pump

BATTERY	BACKUP
	SUMP PUMP

Sump Pump

Description

The ESP15 is a battery operated back-up sump pump. It does not replace a regular pump. It is designed to provide protection in the event household electrical power fails.

power is turned off. If the shutoff box is in the basement, call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.

All wiring must be performed by a

qualified electrician.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

hazardous situation which, if not avoided, will result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially

hazardous situation which, if not avoided, may result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

General Safety

Information

Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in a flammable and/or explosive atmosphere. Pump should only be used to pump clear water. Fatal injury and/or property damage could result.

If the basement has water or moisture on the floor, do not walk on wet area until all

Do not expose battery to sparks or flames as an explosion or fire could result.

Battery acid is corrosive. Avoid spilling on skin or clothing. Eye protection must be worn when handling the battery.

A check valve must be used on

the primary sump pump discharge (see Figure 1)

A ground fault circuit interrupter is

required.

This pump must only be used to pump

clear water. This pump is not designed to handle effluent, salt water, brine, laundry discharge or any other application which may contain caustic chemicals and/or foreign materials. Pump damage may occur if used in these applications and will void warranty.

Battery Requirements

1.Use only a new fully charged 12 volt deep cycle battery. Electrolyte level must be checked and maintained in accordance with manufacturer’s guidelines.

2.Battery sizes that will fit into the battery box are 24C, 24VCM, 27C, 27CM and 27F.

3.Battery recharge time will be different at each installation. Under normal conditions it will take two to four days to bring a deep cycle battery back to full charge after it has

	4 inch min.
	↔
	↔	1 inch
	↔	min.
		min.
	Check
	valve
	Figure 1

3.Measure and cut discharge pipe so that back-up pump is a minimum of 1 inch above the main pump. This will allow main pump to operate normally (see Figure 1).

4.Check the fit of the components before permanently attaching. Using PVC cement, glue tee in place. Note

351201-001 6/99

ESP15 specifications

The Wayne ESP15 is an impressive submersible sump pump designed for residential and light commercial applications. Known for its reliability and robust performance, it effectively manages water accumulation, keeping basements and crawl spaces dry. This pump has become popular among homeowners and builders alike, thanks to its advanced technologies and user-friendly features.

One of the standout characteristics of the Wayne ESP15 is its powerful motor. With a 1/2 horsepower rating, it provides strong pumping action, capable of moving up to 4,600 gallons of water per hour at a height of 10 feet. This performance is particularly crucial in areas prone to flooding or heavy rainfall, where prompt and efficient water removal is necessary to prevent damage to property.

The ESP15 incorporates an innovative thermoplastic construction, making it both lightweight and durable. The materials used are resistant to corrosion, which ensures a long lifespan even in damp and harsh environments. Additionally, the pump is designed for easy installation, featuring a pre-installed tethered float switch. This switch allows it to automatically turn on and off based on water levels, offering convenience and peace of mind for users.

Another significant feature of the Wayne ESP15 is its ability to operate quietly. The pump is designed for minimal noise during operation, allowing homeowners to rest easy knowing their sump pump is working effectively without disrupting their peace. Furthermore, its compact design ensures that it can fit in tight spaces, allowing for versatile placement options.

The Wayne ESP15 is also energy efficient. With its high-performance motor, it uses power judiciously, resulting in cost savings on electricity bills over time. This energy efficiency makes it a great choice for environmentally conscious consumers.

In terms of maintenance, the Wayne ESP15 requires minimal effort. The pump's design facilitates easy access for routine checks, ensuring that it continues to function optimally. Backup power compatibility is another feature that enhances its reliability, allowing for operation even during power outages.

Overall, the Wayne ESP15 is an exceptional sump pump that combines power, efficiency, and ease of use. Its main features, including a robust motor, durable construction, and user-friendly design, make it a leading choice for effectively managing water in residential properties. Whether dealing with heavy rain or basement flooding, the Wayne ESP15 stands as a reliable solution for homeowners looking to protect their living spaces from water damage.