Zenoah RMSZ2500 manual Operation, OP1, OP21, OP3 OP4 Starting Engine

Page 18

8. Operation

OP1

OP2(1)

(2)

(3)

OP3

(5)

(6)

(4)

(7)

OP4

■STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

2.Push the primer pump several times until overflown fuel flows out in the clear tube. (OP1)

3.Move the choke lever to the closed position. (OP2)

4.Set the ignition switch to the “start” position. While pulling the throttle lever, push the set button, and release the throttle, then the throttle lever is in to the “start” position. (OP3)

5.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP4)

(1)Choke lever (2) Close (3) Open

(4)Ignition Switch (5) Start (6) Stop

(7)Throttle Set Button

IMPORTANT

•Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

6.Move the choke lever downward to open the choke. And restart engine. (OP2)

7.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stopping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents RMSZ2500 RMS9-99102Page Safety First ContentsParts location Specifications RMSZ2500Avertissement Symbols on the machine Important Engine InformationFor safe operation Working ConditionWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product Use only for tasks explained in the manualMaintenance If Someone ComesHandling Fuel Transportation Set up SE4 Sweeper Assembly SE4 Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum AssemblyHOW to MIX Fuel FuelRecommended Mixing Ratio Gasoline 50OIL Fueling the Unit For Your Engine LIFE, AvoidOP21 OperationOP1 OP3 OP4 Starting EngineOP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 OP7 Stopping Engine OP3OP8 OP9 Direction of rotationMaintain a shallow angle to the work surface Operating and Safety Tips OP11OP10 OP11 YOU Must Always Guard Against Thrown DebrisLoad General Safety InstructionsNever make unauthorized attachment installations Stay Alert Avoid low rpm operationMaintenance Maintenance ChartGearcase Lubrication MA1 End cap Main gearAIR Filter Replacement Plug is a NGK CMR7AMA2 MA3 MA4 Fuel FilterSpark Arrester MA5Muffler Spark ArresterMA7 Procedures to be Performed After Every 100 Hours of USEMA61 Cylinder Intake Air Cooling Vent backTroubleshooting guide StorageCheck Probable Causes Action Parts list RMSZ2500  31   32   33  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

RMSZ2500 specifications

The Zenoah RMSZ2500 stands as a premier offering in the realm of brushless gas-powered engines for a variety of applications, particularly in the niche of gardening and landscaping equipment. Renowned for its reliability and robust performance, the RMSZ2500 embodies the cutting-edge advancements in engine technology, making it a popular choice among professionals and hobbyists alike.

One of the key features of the RMSZ2500 is its powerful engine, which delivers an impressive 25 cc displacement that strikes a balance between power and efficiency. This engine is designed to operate smoothly across different RPMs, ensuring that users can tackle a variety of tasks, from trimming and mowing to heavier-duty cutting jobs. Equipped with an efficient two-stroke design, it optimizes fuel consumption while providing consistent power output, thus enhancing productivity in any landscaping endeavor.

Incorporating advanced technologies, the RMSZ2500 is equipped with a digital ignition system. This innovation ensures quicker starts and a more efficient combustion process, which translates to lower emissions and improved fuel economy. The precision-engineered carburetor further enhances fuel efficiency and overall performance, allowing users to work longer without frequent refueling.

The lightweight construction of the RMSZ2500 is another notable characteristic. Weighing significantly less than many of its competitors, it is designed with user comfort in mind. The ergonomic design of the handles minimizes user fatigue, promoting extended usage without discomfort. This is particularly beneficial for professional landscapers and gardeners who require equipment that can be used for prolonged periods.

Another aspect worth mentioning is the RMSZ2500’s durability. Built with high-quality materials, it can withstand rigorous working conditions. The robust build quality means that it is not merely an investment in performance but also in longevity. Additionally, ease of maintenance is a significant advantage; users can perform routine checks and maintenance with minimal effort, ensuring that the engine continues to operate at peak performance.

Overall, the Zenoah RMSZ2500 is a testament to superior engineering, providing a blend of power, efficiency, and reliability. Its advanced technologies and user-friendly design make it an ideal choice for those in need of a dependable gas-powered engine for their gardening and landscaping tasks. Whether for professional use or personal projects, the RMSZ2500 does not disappoint.
Top Page Image Contents