Zenoah RMSZ2500 OP5, OP6 OP7 Stopping Engine OP3, Adjusting Throttle Cable, BREAK-IN Operation

Page 19

8. Operation

OP5

.04 in

(1~2mm) (1)

OP6

(1)

OP7

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP5)

(1) Cable Adjuster

■ADJUSTING IDLING SPEED (OP6)

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) Idle Adjusting Screw

NOTE

•Warm up the engine before adjusting the idling speed.

■BREAK-IN OPERATION

The Properly Dressed Operator (OP7)

(1)ALWAYS wear hearing protective devices.

(2)ALWAYS wear eye protection such as goggles or safety glasses.

(3)ALWAYS wear a mask to protect against dust or other airborne particles.

(4)ALWAYS wear close fitting clothes. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

(5)ALWAYS wear leather or heavy-rubber shoes. NEVER work barefooted!

(6)BEWARE of thrown debris!

(7)DIRECTION OF ROTATION

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents RMS9-99102 RMSZ2500Page Contents Safety FirstParts location RMSZ2500 SpecificationsAvertissement Important Engine Information Symbols on the machineWorking Condition For safe operationWorking Circumstance Working Plan Starting the Engine Before Starting the EngineUse only for tasks explained in the manual Using the ProductIf Someone Comes MaintenanceHandling Fuel Transportation Set up Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum Assembly SE4 Sweeper Assembly SE4Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL For Your Engine LIFE, Avoid Fueling the UnitOP3 OP4 Starting Engine OperationOP1 OP21OP6 OP7 Stopping Engine OP3 Adjusting Throttle CableAdjusting Idling Speed OP6 OP5Direction of rotation OP8 OP9YOU Must Always Guard Against Thrown Debris Operating and Safety Tips OP11OP10 OP11 Maintain a shallow angle to the work surfaceAvoid low rpm operation General Safety InstructionsNever make unauthorized attachment installations Stay Alert LoadMaintenance Chart MaintenanceGearcase Lubrication End cap Main gear MA1Fuel Filter Replacement Plug is a NGK CMR7AMA2 MA3 MA4 AIR FilterSpark Arrester MA5Muffler Spark ArresterCylinder Intake Air Cooling Vent back Procedures to be Performed After Every 100 Hours of USEMA61 MA7Storage Troubleshooting guideCheck Probable Causes Action Parts list RMSZ2500  31   32   33  Limited Warranty RedMax Garantie limitée Komatsu Zenoah America INC

RMSZ2500 specifications

The Zenoah RMSZ2500 stands as a premier offering in the realm of brushless gas-powered engines for a variety of applications, particularly in the niche of gardening and landscaping equipment. Renowned for its reliability and robust performance, the RMSZ2500 embodies the cutting-edge advancements in engine technology, making it a popular choice among professionals and hobbyists alike.

One of the key features of the RMSZ2500 is its powerful engine, which delivers an impressive 25 cc displacement that strikes a balance between power and efficiency. This engine is designed to operate smoothly across different RPMs, ensuring that users can tackle a variety of tasks, from trimming and mowing to heavier-duty cutting jobs. Equipped with an efficient two-stroke design, it optimizes fuel consumption while providing consistent power output, thus enhancing productivity in any landscaping endeavor.

Incorporating advanced technologies, the RMSZ2500 is equipped with a digital ignition system. This innovation ensures quicker starts and a more efficient combustion process, which translates to lower emissions and improved fuel economy. The precision-engineered carburetor further enhances fuel efficiency and overall performance, allowing users to work longer without frequent refueling.

The lightweight construction of the RMSZ2500 is another notable characteristic. Weighing significantly less than many of its competitors, it is designed with user comfort in mind. The ergonomic design of the handles minimizes user fatigue, promoting extended usage without discomfort. This is particularly beneficial for professional landscapers and gardeners who require equipment that can be used for prolonged periods.

Another aspect worth mentioning is the RMSZ2500’s durability. Built with high-quality materials, it can withstand rigorous working conditions. The robust build quality means that it is not merely an investment in performance but also in longevity. Additionally, ease of maintenance is a significant advantage; users can perform routine checks and maintenance with minimal effort, ensuring that the engine continues to operate at peak performance.

Overall, the Zenoah RMSZ2500 is a testament to superior engineering, providing a blend of power, efficiency, and reliability. Its advanced technologies and user-friendly design make it an ideal choice for those in need of a dependable gas-powered engine for their gardening and landscaping tasks. Whether for professional use or personal projects, the RMSZ2500 does not disappoint.
Top Page Image Contents