GB-14

PSZ2600

9. Maintenance

SPARK ARRESTER

•The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet. Periodically inspect and clean as necessary with a wire brush. In the State of California it is required by law (Section 4442 of the California Public Resources Code) to equip a spark arrester when a gas powered tool is used in any forest covered, brush covered, or grass covered unimproved land.

(1)

(1) Spark arrester

INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muffler to be- come overheated and that in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cyl- inder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note that it is necessary to remove the engine cover shown in (MA5) in order to be able to view the upper part of the cylinder.

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter.

(1)

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has, wipe it away using oil-free, lead-free gasoline.

OILING PORT

Dismount the guide bar and check the oiling port for clogging. (MA1)

(1)

(1) Oiling port

GUIDE BAR

Remove sawdust in the bar groove and the oiling port.

(1) Groove (2) Oiling port

(Type: Sprocket nose)

Grease the nose sprocket from the feeding port on the tip of the bar.

(1) Grease port (2) Sprocket

The bar rail should always be a square. Check for wear of the bar rail. Apply a ruler to the bar and the outside of a cutter. If a gap is observed between them, the rail is normal. Otherwise, the bar rail is worn. Such a bar needs to be corrected or replaced.

(2)

(1)Cylinder

(2)Intake air cooling vent (back)

PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

(1)	Ruler	(2)	Gap
(3)	No gap	(4)	Chain tilts

PSZ2600 specifications

The Zenoah PSZ2600 is a versatile and robust handheld power tool designed for a variety of outdoor tasks, particularly in landscaping and gardening. This model stands out in the market due to its blend of advanced technology, user-friendly features, and outstanding performance.

One of the main features of the Zenoah PSZ2600 is its powerful engine. The unit is equipped with a highly efficient 25.4cc two-stroke engine that delivers impressive power while maintaining low fuel consumption. This engine is not only designed for high performance but also for environmental responsibility, meeting stringent emissions regulations without sacrificing power output.

The PSZ2600 boasts a lightweight design, making it easy to handle during prolonged use. Weighing in at just over 5 kg, it reduces the strain on the user, allowing for extended periods of work without excessive fatigue. Its ergonomic design includes a comfortable handle and a well-balanced body, enhancing maneuverability and ease of operation.

Another notable characteristic of the PSP2600 is its advanced vibration-damping technology. This feature minimizes vibrations during operation, which not only improves user comfort but also increases control over the tool. This technology is particularly beneficial during extended use, reducing the risk of fatigue-related injuries.

The Zenoah PSZ2600 also offers a variety of attachments, making it a multifunctional tool. Its compatibility with several accessories enables users to transform it into a hedge trimmer, brush cutter, or pole saw, catering to diverse gardening and landscaping needs. This versatility makes it an excellent investment for both professionals and homeowners alike.

Ease of maintenance is another key aspect of the Zenoah PSZ2600. The tool includes a tool-less air filter cover, allowing for quick and easy access for cleaning or replacement. The fuel system is designed for easy refueling, further enhancing the user experience.

Overall, the Zenoah PSZ2600 stands as a testament to innovative engineering in handheld power tools. Its powerful engine, lightweight design, user-oriented features, and versatility make it an exceptional choice for anyone looking to tackle outdoor projects with efficiency and ease. Whether you're a professional landscaper or a gardening enthusiast, the PSZ2600 is designed to meet your needs effectively.