Maintenance | Zenoah PSZ2600 specs

PSZ2600

9. Maintenance

				Every	Every	Every
	System/components	Procedure	Before	25	50	100	Note
	System/components	Procedure	use	hours	hours	hours	Note
			use	hours	hours	hours
				after	after	after
	fuel leaks, fuel spillage	wipe out	✔
	fuel tank, air filter, fuel filter	inspect/clean	✔	✔			replace, if necessary
ENGINE	idle adjusting screw	see ■ adjusting	✔				replace carburetor
	idle adjusting screw	idling speed (p. 11)	✔		✔		if necessary
	spark plug				✔

		clean and readjust					GAP: .025 in (0.6 ~ 0.7 mm)
		plug gap					replace, if necessary
	cylinder fins, intake air cooling vent	clean		✔
	muffler, spark arrester,	clean,			✔
	cylinder exhaust port	remove piled up carbon			✔
	cylinder exhaust port	remove piled up carbon
SHAFT	throttle lever, ignition switch	check operation	✔
SHAFT	gear case	grease		✔
	gear case	grease		✔
	screws/nuts/bolts	tighten/replace	✔			✔	not adjusting screws
UNIT	oiling port	clean	✔			✔
UNIT	guide bar	clean	✔
CUTTING	guide bar	clean	✔
CUTTING	sprocket	inspect/replace			✔
	sprocket	inspect/replace			✔
	saw chain	inspect/sharp	✔

G B

WARNING

•Make sure that the engine has stopped and is cool before per- forming any service to the machine. Contact with moving cut- ting head or hot muffler may result in a personal injury.

AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one.

(1)

(1) Air filter

FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

(1)

(1) Fuel filter

SPARK PLUG

•Starting failure and misfiring are often caused by a fouled spark plug. Clean the spark plug and check that the plug gap is in the correct range. For a replacement plug, use the correct type specified by ZENOAH.

0.6~ 0.7 mm

•REPLACEMENT PLUG IS A NGK CMR7A.

IMPORTANT

•Note that using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

87 ~ 104 in-lbs

TIGHTENING TORQUE: (9.8 ~ 11.8 N.m.)

MUFFLER

WARNING

•Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately.

•Note that failing to do so may result in the engine catch- ing on fire.

GB-13

PSZ2600 specifications

The Zenoah PSZ2600 is a versatile and robust handheld power tool designed for a variety of outdoor tasks, particularly in landscaping and gardening. This model stands out in the market due to its blend of advanced technology, user-friendly features, and outstanding performance.

One of the main features of the Zenoah PSZ2600 is its powerful engine. The unit is equipped with a highly efficient 25.4cc two-stroke engine that delivers impressive power while maintaining low fuel consumption. This engine is not only designed for high performance but also for environmental responsibility, meeting stringent emissions regulations without sacrificing power output.

The PSZ2600 boasts a lightweight design, making it easy to handle during prolonged use. Weighing in at just over 5 kg, it reduces the strain on the user, allowing for extended periods of work without excessive fatigue. Its ergonomic design includes a comfortable handle and a well-balanced body, enhancing maneuverability and ease of operation.

Another notable characteristic of the PSP2600 is its advanced vibration-damping technology. This feature minimizes vibrations during operation, which not only improves user comfort but also increases control over the tool. This technology is particularly beneficial during extended use, reducing the risk of fatigue-related injuries.

The Zenoah PSZ2600 also offers a variety of attachments, making it a multifunctional tool. Its compatibility with several accessories enables users to transform it into a hedge trimmer, brush cutter, or pole saw, catering to diverse gardening and landscaping needs. This versatility makes it an excellent investment for both professionals and homeowners alike.

Ease of maintenance is another key aspect of the Zenoah PSZ2600. The tool includes a tool-less air filter cover, allowing for quick and easy access for cleaning or replacement. The fuel system is designed for easy refueling, further enhancing the user experience.

Overall, the Zenoah PSZ2600 stands as a testament to innovative engineering in handheld power tools. Its powerful engine, lightweight design, user-oriented features, and versatility make it an exceptional choice for anyone looking to tackle outdoor projects with efficiency and ease. Whether you're a professional landscaper or a gardening enthusiast, the PSZ2600 is designed to meet your needs effectively.

PSZ2600

9. Maintenance

sprocket

inspect/replace

saw chain

inspect/sharp