Zenoah KAM-402 owner manual Trouble shooting, Disposal

Page 17

9. Trouble shooting

PHENOMENON

MAIN CAUSE

MEASURES

 

 

 

The engine does not start.

• Bad fuel (different quality, deterioration)

• Replace it with normal fuel (page 11).

 

 

 

 

• Excessive sucking of fuel

• Open the choke, open the throttle full

 

 

open, and pull out the rope repeatedly

 

 

(page 12).

 

 

 

 

• Clogging of the muffler exhaust vent

• Clean the muffler (page 16).

 

 

 

 

• Contamination of the spark plug electrodes,

• Clean the electrodes or replace the plug

 

Short-circuit or breaking of a wire

(page 15).

 

 

 

The engine does not accelerate.

• Bad fuel (different quality, deterioration)

• Replace it with normal fuel (page 11).

 

 

 

 

• Clogging of the muffler exhaust vent

• Clean the muffler (page 16).

 

 

 

The engine stalls when the throttle

• The idling revolution speed is too low.

• Readjust the idling adjustment screw

is returned to its original position.

 

(page 13).

 

 

 

The engine rotation speed changes.

• Clogging of the fuel filter

• Clean or replace the fuel filter (page 15).

 

 

 

Abnormal vibration

• Deformation or damage of the blade

• Replace the blade (page 10).

 

 

 

Deterioration of fuel consumption

• Clogging of the air cleaner

• Clean the air cleaner (page 15).

 

 

 

 

• Blunt blade

• Replace the blade (page 10).

 

 

 

 

• Bad lubrication of the gear case

• Supply grease (page 15).

 

 

 

When the symptoms in the left column do not improve after taking the measures in the right column, please contact the shop where you bought this product.

For the measures marked with , please buy ZENOAH’s genuine parts at the shop where you bought this product.

WARNING

Do not modify or disassemble the machine. Modification or disassembly of the machine might cause the machine to be damaged during operation, or cause an unexpected accident due to the leakage of fuel or malfunction of the machine.

When you carry out inspection or maintenance of the machine, keep the machine clear of fire (such as a lit cigarette). Otherwise, the fuel might catch fire.

Use ZENOAH’s genuine or dedicated tightening parts (bolts, nuts and screws). Use of other manufacturers’ parts might damage the machine, or cause an unexpected accident due to parts falling off while the machine is in operation.

10. Disposal

When you dispose of the machine, do not disassemble the machine.

When you dispose of the machine, fuel, oil, be sure to follow your local regulations.

17

Image 17
Contents KAM-402 Contents 15m 50ft Specifications Symbols on the machinePosition AIR Cleaner Cover Position Fuel Tank CAPWorking Condition Safety precautionsWorking Circumstance Working PlanStarting the Engine Using the ProductBefore Starting the Engine If Someone Comes MaintenanceHandling Fuel TransportationHow you can maintain the best control How you can reduce the chance of blade thrustSet up SE8 Installing BladeSE7 Blade Balance UnitMixing ratios FuelOperation Line Head Usage Adjusting Idling Speed Adjusting Throttle CableStopping Engine OP8Trimming Grass and Weeds Adjusting the Line LengthMaintenance Maintenance Before LONG-TERM Storage Muffler Maintenance Before StorageProcedures to be Performed After Every 100 Hours of USE MA6Disposal Trouble shootingWarranty does not Apply to Those Limited warrantyPage Zenoah