Zenoah KAM-402 owner manual Symbols on the machine, Specifications, Position Fuel Tank CAP

2. Symbols on the machine

For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to take a mistake.

(a) The port to refuel the "MIX GASOLINE"

Position: FUEL TANK CAP

(b) The direction to close the choke

Position: AIR CLEANER COVER

(c) The direction to open the choke

Position: AIR CLEANER COVER

3. Specifications

		Name/Type		ZENOAH Brushcutter
				KAM-402
		Handle Type		Double
	Machine Weight (✽1)		kg	7.8
Outward Size (L x W x H)			mm	1845 x 650 x 560
		Outer pipe	mm	1500 / ø28
		Applied Head		2-teeth blade(12”), 4-teeth blade, 8-teeth blade, round saw blade(10”), line head
Power Transmission Method				Automatic centrifugal clutch, spiral gear
		Reduction Rate		1.400 (21 : 15)
Blade Rotating Direction				Counterclockwise (from operator' s view)
		Type		Single cylinder air cooling 2-cycle gasoline engine
		Displacement Volume	cc	41.5
		Fuel Tank Capacity		0.94
		Fuel Used		Lubricating oil mixed gasoline
		Lubricating Oil Used		2-cycle engine oil
Engine		Mixing rate		when using ZENOAH genuine oil (FC grade): 50:1
				when using market oil (FB grade): 25:1
		Carburetor		float, piston valve
		Sparking Method		C D I
		Spark Plug		NGK BPMR7A
		Starting Method		Recoil starter
		Stopping Method		Sparking Circuit Primary Short (push button)

(✽1) excluding cutting head, shoulder strap and fuel

Please note that due to improvement, detailed specifications of the product may differ from the information herein.

4