5. Set up
WARNING
•Assemble each part correctly. Wrong assembly might cause an accident.
•If you cannot do the assembling yourself, consult the shop where you bought this product.
■ENGINE
•Using attached 4 socket screws, secure the connection firmly with equal force.
SE1
■CONNECTING SWITCH WIRES
•Connect the switch wires between the engine and the main unit.
SE4
■INSTALLING DEBRIS GUARD
1.Fit the guard skirt on debris guard.
2.Attach the debris guard with the bolts provided to the pipe.
■HANDLE
1.Loosen the 4 bolts on the upper cap and insert the handles equally. Retighten the bolts.
2.Put the handle assembly into the bracket and put the upper cap over it. Tighten the cap securely.
SE2
■CONNECTING THROTTLE WIRE
1. Remove the air cleaner cover.
2. Connect the end of the throttle wire to the joint on the top of the carburetor.
SE3
1.2.
SE5
Guard skirt
for line head only
■INSTALLING LINE HEAD
1.While locking the gear shaft by inserting the hexagonal bar into the holder A on the gear box, loosen and remove the nut
2.Fit the line head assembly to the gear shaft. Tighten it securely by hand.
SE6 | (1) Hexagonal |
| bar |
| (2) Holder A |
| (3) Holder B |
|
|
9