Zenoah HBZ2602 Operation, Starting Engine, Restarting Engine While Engine is HOT, Stopping Engine

Page 11

8. Operation

STARTING ENGINE

1.Rest the unit on a flat, firm place.

2.Pump the primer until fuel flows out in the clear tube.

(1)Primer

3. Move the choke lever upward to close the choke.

(1) Choke lever

(2) Close

(3) Open

4. Shift the ignition switch to “I (START)” position.

(1) Ignition switch

5.Holding the blower handle, pull the starter rope with your right hand.

(Throttle trigger in idle or start position.)

IMPORTANT

•Avoid pulling the starter rope out to its full extent and allowing the starter rope to snap back. This will pre- vent premature damage to the starter.

•Do not let a person stand near the blower or the ex- haust port.

HB2302 / HBZ2602

6.When the engine has started, move the choke lever gradually downward to open the choke.

7.Allow the engine to warm up for a half minute before starting operation.

RESTARTING ENGINE WHILE ENGINE IS HOT

G

B

1. When restarting the engine immediately after stop-

 

ping it, leave the choke open.

 

2. If the engine won’t start after several attempts, close

 

the choke and repeat pulling the rope or remove the

 

spark plug and dry it.

 

ADJUSTING IDLE SPEED

1.When the engine tends to stop frequently at an idle mode, turn the adjusting screw clockwise.

(1)Idling adjustment screw

(2)Cable Adjuster

NOTE

• Warm up the engine before adjusting the idle speed.

STOPPING ENGINE

•Move the throttle lever to the idling position and shift the ignition switch to “0 (STOP)” position.

(1) Ignition switch

NOTE

•Except for an emergency, avoid stopping the engine while pulling the throttle trigger.

GB-11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents GB-1 HB2302 HBZ2602Wear head, eye and ear protection Parts location ContentsModel HB2302 HBZ2602 SpecificationSymbols on the machine Working Condition For safe operationNever let a child under 13 years old use the machine Fuel Avoid Noise ProblemWorking Circumstance Working PlanGB-7 Using the ProductTo reduce the risk of injury asso Ciated with thrown objectsDisposal MaintenanceTransportation StorageBlower Pipe Set upInstalling Support Handle Fueling the Unit HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50 OILRestarting Engine While Engine is HOT Adjusting Idle SpeedOperation Starting EngineCleaning AIR Filter HB2302 MaintenanceAIR Cleaner Spark Plug Replacement PlugProcedures to be Performed After EV- ERY 50 Hours of USE Fuel FilterAIR Intake Screen AIR Inlet NET StorageDisposal Optional vacuum kit usageCheck Probable Causes Action Troubleshooting guideLimited warranty Case 1. Starting failure

HBZ2602 specifications

The Zenoah HBZ2602 is a powerhouse in the realm of handheld outdoor equipment, particularly valued by professionals and enthusiasts alike for its reliability and performance. This high-performance engine is engineered for various applications, including gardening, landscaping, and maintenance tasks, making it a versatile choice for a wide array of users.

One of the standout features of the Zenoah HBZ2602 is its robust 25.4 cc two-stroke engine. This engine combines power and efficiency, providing superior torque and performance while maintaining a compact design. The air-cooled system ensures optimal temperature control, which is crucial for maintaining performance during extended use. Additionally, the engine is designed with low vibration technology, enhancing user comfort and reducing fatigue during prolonged operation.

The Zenoah HBZ2602 is equipped with advanced combustion technology, which maximizes fuel efficiency and minimizes emissions. The engine's design allows for a cleaner burn, complying with modern environmental standards, appealing to eco-conscious users. This focus on eco-friendliness does not come at a sacrifice to performance; users can expect to achieve high power output while using less fuel, which is both economical and environmentally beneficial.

Another critical characteristic of the HBZ2602 is its ergonomically designed handle, which provides comfort and control. The lightweight frame ensures easy maneuverability, making it an ideal choice for tough tasks over extended periods. The easy-start system incorporated into this model significantly reduces the amount of force required to start the engine. This user-friendly feature saves time and effort, allowing users to focus on their tasks rather than struggling with the starting process.

Furthermore, the Zenoah HBZ2602 is known for its durability. Built with high-quality materials, it can withstand the rigors of heavy use in challenging environments. The rugged construction ensures longevity, making it a wise investment for both professionals and dedicated hobbyists.

In summary, the Zenoah HBZ2602 stands out due to its powerful and efficient engine, innovative technology, ergonomic design, and durability. With features aimed at enhancing user experience and performance, it remains a top choice for those in need of reliable outdoor power equipment.
Top Page Image Contents