English
3. SAFETY PRECAUTIONS
person sufficient to ensure safety. c. Make sure that there are no loose
screws or bolts, fuel leaks, ruptures, dents, or any other problems which might interfere with safe operation. Be especially careful to check that there is nothing wrong with the blades or with the joints by which the blades are attached to the product.
d. Never use blades that are bent, warped, cracked, broken or damaged in any way.
e. Keep the blade always sharp.
f.Filing the cutting edges, keep the end corner sharp and round the root of the edge.
g.Check the bolt to fasten the blade and be sure the blade turns smoothly without abnormal noise.
■NOTES ON STARTING THE ENGINE
1.Take a careful look around to make sure that no obstacles exist within a perimeter of 15m or less around the product.
2.Place the body of the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the blades nor the throttle come into contact with any obstacles when the engine starts up.
3.Place the throttle into the idling position when starting the engine.
4.After starting up the engine, if the blades continue to rotate even after the throttle has been moved fully back, turn off the engine and check the throttle wire and other parts.
■KICKBACK SAFETY PRECAUTIONS
• A dangerous reaction may occur
8