English
3. SAFETY PRECAUTIONS
when the spinning blade contacts a solid object in the critical area. It is called Kick back. As a result, the operator can lose control of the unit which can cause serious or fatal injury.
Avoid kickback, observe the safety precautions below strictly.
1. Keep the cutting blades clear of fances, posts, wires, and rocks to prevent kickback and damage to the blades.
2. When using your product, do not grip other parts except the handles.
3. When using your product, never take your eyes off. If you need to, place the throttle into the idling position.
4. When using your product, do not let the unit get closer to your feet nor raise the unit above your waist.
■ NOTES ON TRANSPORTATION
a. Make sure the appropriate blade cover is in place.
b. When transporting by car, fix the unit firmly using a rope. Do not transport by bicycle or motorbike because it is dangerous.
c. Never transport the product over rough roads over long distances without first removing all fuel from the fuel tank, as doing so might cause fuel to leak from the tank.
■ OPERATION SAFETY PRECAUTIONS
a. Grip the handles of the product firmly with both hands. If you suspend the work, place the throttle into the idling position.
b. Always be sure to maintain a steady, even posture while working.
c. Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.
d. If the grass gets caught in the blade during operation, or if you
9