Zenoah BK2651DL owner manual Stopping Engine, Adjusting Throttle Cable, Adjusting Idling Speed

Page 11

8. Operation

NOTE

This brush cutter can be operated in either the right side or left side position. The rope guide position is fixed for right side position operation when shipped from the factory.

Adjust the rope guide position as shown in the figure to allow the operator in the left-hand position to pull the recoil starter with the right hand.

When changing the position from right to left side, or from left to right side position, be sure to stop the en- gine and place the frame on the ground. Change the orientation of the shaft and carry the frame on the back again.

Do not change the orientation of the shaft while carry- ing the unit on the back.

Otherwise, accidental injury may occur.

Right side

Rope guide

Left side

Rope guide

BK2651DL

STOPPING ENGINE

1.Release the throttle lever and run the engine for half a minute.

2. Shift the ignition switch to the STOP position.

G

 

B

IMPORTANT

 

Except for an emergency, avoid stopping the engine while pulling the throttle lever.

ADJUSTING THROTTLE CABLE

The normal play is 1 or 2 mm when measured at the carburetor side end. Readjust with the cable adjuster as required.

(1)

Cable adjuster

(2)

0.04in (1-2mm)

(2)

 

(1)

 

ADJUSTING IDLING SPEED

1.When the engine tends to stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1)

(1)Idle adjusting screw (cross screw)

NOTE

• Warm up the engine before adjusting the idling speed.

WARNING

The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the en- gine starts.

GB-11

Image 11
Contents BK2651DL EC Declaration of Comformity Parts location ContentsSymbols on the ma- chine SpecificationWorking Plan For safe operationWorking Condition Working CircumstanceStarting the Engine Using the ProductBefore Starting Engine Transportation MaintenanceIf Someone Comes Handling FuelSet up Fuel Starting a Warmed Engine OperationStarting a Cooled Engine Stopping Engine Adjusting Throttle CableAdjusting Idling Speed Trimming Grass and Weeds Putting on the UnitCutting Work Refilling Trimming Line MaintenanceAdjusting the Line Length Muffler Replacement Plug is a NGK BPMR7AAIR Filter Fuel FilterIntake AIR Cooling Vent Procedures to be Performed After Every 100 Hours of USEStorage DisposalCheck Probable Causes Action Troubleshooting guideLimited warranty

BK2651DL specifications

The Zenoah BK2651DL is a powerful and versatile petrol-powered brush cutter, designed for both professional landscapers and homeowners seeking an efficient tool for tackling various outdoor maintenance tasks. Known for its reliability and performance, the BK2651DL combines innovative technology with user-friendly features to deliver outstanding results.

One of the standout characteristics of the Zenoah BK2651DL is its robust 25.4cc engine. This dual-cycle engine provides a perfect balance of power and fuel efficiency, ensuring users can complete their tasks without frequent interruptions for refueling. The engine utilizes a specially designed intake system, enhancing airflow for better combustion, which translates into improved power output and reduced emissions.

Ergonomics play a significant role in the design of the BK2651DL. The brush cutter features an adjustable handle, allowing for customized operation angles tailored to the user's height and preference. This not only enhances comfort during prolonged use but also minimizes operator fatigue. The lightweight design of the unit, weighing only around 5.3 kilograms, further contributes to ease of handling and maneuverability in tight spaces.

Another defining feature of the Zenoah BK2651DL is its low vibration technology. This innovation significantly reduces the amount of vibration transmitted to the user’s hands and arms, making it an ideal choice for extended use, particularly for those who regularly engage in heavy-duty tasks. Additionally, the machine incorporates a sophisticated anti-kickback system, which increases safety by stabilizing the tool during operation.

The BK2651DL is designed with a quick-release attachment system, facilitating the easy interchange of different cutting blades and accessories. This versatility allows users to switch from cutting grass to tackling thicker brush or even small trees effortlessly. The dual-line cutting head simplifies line replacement, making maintenance straightforward and efficient.

In conclusion, the Zenoah BK2651DL is an exceptional brush cutter that excels in performance, comfort, and adaptability. Its powerful engine, ergonomic features, and advanced technologies make it suitable for a variety of tasks, making it a valuable tool for anyone looking to maintain their landscape efficiently. With Zenoah's commitment to quality and innovation, the BK2651DL stands out as an excellent choice in the competitive market of outdoor power equipment.