Zenoah BK2651DL owner manual Set up

Page 8

BK2651DL

6. Set up

INSTALLING THE SHOULDER STRAP

1.Hook the upper part of the shoulder strap at the notch on the top of the frame and pass it through the buckle as shown in the Figure, then secure it firmly.

2.Put the hook at the lower part of the shoulder strap in the strap installing location at the bottom of the frame.

Buckle

Frame

Hook

D-ring

INSTALLING CUTTING HEAD

1.While locking the gear shaft, by inserting the supplied tool into the upper holder on the gearbox, loosen and remove the hexagon nut (left-handed).

2.Then screw in the cutting head to the gear shaft over the holders. Hand-tighten it securely.

DEBRIS GUARD SKIRT FOR LINE HEAD

•When using line head, make sure to attach the guard skirt.

INSTALLING HANDLE

•Mount the handle to the shaft tube and clamp it at a location that the edge of CE label is matched with the handle.

WARNING

•Stop tightening the screws when the gap A be- comes zero.

CE label

CONNECTING THE FLEXIBLE SHAFT AND BK2651DL

1.Remove the retaining bolt (M5 x 10) at the center of the joint end and loosen the fixing bolt (M5 x 20). Loosen also the fixing screws (M5 x L20) at two loca- tions that fix the throttle lever assembly. Be careful not to drop the nuts.

2.Insert the throttle lever assembly in the main pipe.

3.Push the main pipe in the joint while rotating it gently to the right and left.

4.Align the retaining screw hole for the joint with the main pipe hole, screw in the retaining bolt and se- cure it firmly.

5.Tighten the joint fixing bolt to fix the main pipe se- curely.

[Tightening torque] 4.9 to 7.8 N-m (0.5 to 0.8 kg-m)

6.Slide the throttle lever assembly toward the joint, screw in the fixing screw and secure it firmly.

(1) Retaining hole

(2) Main pipe

(3) Cramp screw

(4) Joint

(5) Retaining bolt

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head aparting from the ground when using it.

GB-8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BK2651DL EC Declaration of Comformity Contents Parts locationSpecification Symbols on the ma- chineFor safe operation Working ConditionWorking Circumstance Working PlanStarting the Engine Using the ProductBefore Starting Engine Maintenance If Someone ComesHandling Fuel TransportationSet up Fuel Starting a Warmed Engine OperationStarting a Cooled Engine Stopping Engine Adjusting Throttle CableAdjusting Idling Speed Trimming Grass and Weeds Putting on the UnitCutting Work Refilling Trimming Line MaintenanceAdjusting the Line Length Replacement Plug is a NGK BPMR7A AIR FilterFuel Filter MufflerProcedures to be Performed After Every 100 Hours of USE StorageDisposal Intake AIR Cooling VentCheck Probable Causes Action Troubleshooting guideLimited warranty

BK2651DL specifications

The Zenoah BK2651DL is a powerful and versatile petrol-powered brush cutter, designed for both professional landscapers and homeowners seeking an efficient tool for tackling various outdoor maintenance tasks. Known for its reliability and performance, the BK2651DL combines innovative technology with user-friendly features to deliver outstanding results.

One of the standout characteristics of the Zenoah BK2651DL is its robust 25.4cc engine. This dual-cycle engine provides a perfect balance of power and fuel efficiency, ensuring users can complete their tasks without frequent interruptions for refueling. The engine utilizes a specially designed intake system, enhancing airflow for better combustion, which translates into improved power output and reduced emissions.

Ergonomics play a significant role in the design of the BK2651DL. The brush cutter features an adjustable handle, allowing for customized operation angles tailored to the user's height and preference. This not only enhances comfort during prolonged use but also minimizes operator fatigue. The lightweight design of the unit, weighing only around 5.3 kilograms, further contributes to ease of handling and maneuverability in tight spaces.

Another defining feature of the Zenoah BK2651DL is its low vibration technology. This innovation significantly reduces the amount of vibration transmitted to the user’s hands and arms, making it an ideal choice for extended use, particularly for those who regularly engage in heavy-duty tasks. Additionally, the machine incorporates a sophisticated anti-kickback system, which increases safety by stabilizing the tool during operation.

The BK2651DL is designed with a quick-release attachment system, facilitating the easy interchange of different cutting blades and accessories. This versatility allows users to switch from cutting grass to tackling thicker brush or even small trees effortlessly. The dual-line cutting head simplifies line replacement, making maintenance straightforward and efficient.

In conclusion, the Zenoah BK2651DL is an exceptional brush cutter that excels in performance, comfort, and adaptability. Its powerful engine, ergonomic features, and advanced technologies make it suitable for a variety of tasks, making it a valuable tool for anyone looking to maintain their landscape efficiently. With Zenoah's commitment to quality and innovation, the BK2651DL stands out as an excellent choice in the competitive market of outdoor power equipment.
Top Page Image Contents