Zenoah BK2651DL owner manual Storage, Disposal, Intake AIR Cooling Vent

Page 15

9. Maintenance

INTAKE AIR COOLING VENT

WARNING

•Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns.

•When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muf- fler to become overheated and that in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use.

•Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note that it is necessary to remove the upper cover and the lower cover shown in in order to be able to view the upper part of the cylinder.

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter.

BK2651DL

10. Storage

Aged fuel is one of major causes of engine starting fail- ure. Before storing the unit, empty the fuel tank and run the engine until it uses all the fuel left in the fuel line and the carburetor. Store the unit indoor taking necessary measures for rust prevention.

11. Disposal

When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

G B

Intake air cooling vent

PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylin- der exhaust port at the same time.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has, wipe it away using oil-free, lead-free gasoline.

GB-15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents BK2651DL EC Declaration of Comformity Parts location ContentsSymbols on the ma- chine SpecificationWorking Plan For safe operationWorking Condition Working CircumstanceUsing the Product Before Starting EngineStarting the Engine Transportation MaintenanceIf Someone Comes Handling FuelSet up Fuel Operation Starting a Cooled EngineStarting a Warmed Engine Adjusting Throttle Cable Adjusting Idling SpeedStopping Engine Putting on the Unit Cutting WorkTrimming Grass and Weeds Maintenance Adjusting the Line LengthRefilling Trimming Line Muffler Replacement Plug is a NGK BPMR7AAIR Filter Fuel FilterIntake AIR Cooling Vent Procedures to be Performed After Every 100 Hours of USEStorage DisposalTroubleshooting guide Limited warrantyCheck Probable Causes Action

BK2651DL specifications

The Zenoah BK2651DL is a powerful and versatile petrol-powered brush cutter, designed for both professional landscapers and homeowners seeking an efficient tool for tackling various outdoor maintenance tasks. Known for its reliability and performance, the BK2651DL combines innovative technology with user-friendly features to deliver outstanding results.

One of the standout characteristics of the Zenoah BK2651DL is its robust 25.4cc engine. This dual-cycle engine provides a perfect balance of power and fuel efficiency, ensuring users can complete their tasks without frequent interruptions for refueling. The engine utilizes a specially designed intake system, enhancing airflow for better combustion, which translates into improved power output and reduced emissions.

Ergonomics play a significant role in the design of the BK2651DL. The brush cutter features an adjustable handle, allowing for customized operation angles tailored to the user's height and preference. This not only enhances comfort during prolonged use but also minimizes operator fatigue. The lightweight design of the unit, weighing only around 5.3 kilograms, further contributes to ease of handling and maneuverability in tight spaces.

Another defining feature of the Zenoah BK2651DL is its low vibration technology. This innovation significantly reduces the amount of vibration transmitted to the user’s hands and arms, making it an ideal choice for extended use, particularly for those who regularly engage in heavy-duty tasks. Additionally, the machine incorporates a sophisticated anti-kickback system, which increases safety by stabilizing the tool during operation.

The BK2651DL is designed with a quick-release attachment system, facilitating the easy interchange of different cutting blades and accessories. This versatility allows users to switch from cutting grass to tackling thicker brush or even small trees effortlessly. The dual-line cutting head simplifies line replacement, making maintenance straightforward and efficient.

In conclusion, the Zenoah BK2651DL is an exceptional brush cutter that excels in performance, comfort, and adaptability. Its powerful engine, ergonomic features, and advanced technologies make it suitable for a variety of tasks, making it a valuable tool for anyone looking to maintain their landscape efficiently. With Zenoah's commitment to quality and innovation, the BK2651DL stands out as an excellent choice in the competitive market of outdoor power equipment.
Top Page Image Contents