Before Starting Engine, Starting the Engine

BCZ4000DL / BCZ4000DW / BCZ4200CL

5. For safe operation

BEFORE STARTING

THE ENGINE

1. The area within a perimeter of

15 m (50 ft) of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be performed simulta- neously by two or more persons, care should also be taken to con- stantly look around or otherwise check for the presence and loca- tions of other people working so as to maintain a distance between each person sufficient to ensure safety.

2.Check the condition of working area to avoid any accident by hit- ting hidden obstacles such as stumps, stones, cans, or broken glass.

IMPORTANT

Remove any obstacle before begin- ning work.

3.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment

is properly installed and securely fastened.

4. Be sure to attach the cutting at- tachment guard securely in place, or you may get serious in- jury.

5.Always use the shoulder strap. Adjust the strap for comfort be-

fore starting the engine. The strap should be adjusted so the left hand can comfortably hold the handlebar grip approximately waist high.

STARTING THE ENGINE

1. Keep bystanders and animals at

least 15 m (50 ft) away from the

operating point. If you are ap- proached, immediately stop the engine.

2. The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting

onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts.

WARNING

Never place the throttle into the high-speed position when starting the engine.

3.After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized KOMATSU ZENOAH servicing dealer for re- pair.

USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine

at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.

4. If the unit starts to shake or vi- brate, turn off the engine and check the whole unit. Do not use it until the trouble has been prop- erly corrected.

5.Keep all parts of your body away from rotating cutting attachment

and hot surfaces.

6. Never touch the muffler, spark

plug, or other metallic parts of the

GB-6

the engine, place the product

engine while the engine is in op-

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.