Zenoah BCZ4000DW, BCZ4200CL owner manual Set up

Page 8

BCZ4000DL / BCZ4000DW / BCZ4200CL

6. Set up

INSTALLING HANDLE (BCZ4000DL)

•Tighten the grip firmly. If the grip becomes loose, it might move while you are working, causing danger.

•Do not loosen or twist the grip while you are working.

•Always stop the engine and make sure the blade has stopped before adjusting the position of the loop

handle.

1.Remove the grip of the loop handle, washer and mounting bolt associated with this product, and remove the stopper.

2.Push the loop handle onto the main pipe as shown in Fig. 1.

Be careful not to mount the loop handle in the wrong direction.

3.Push the stopper in the direction of the arrow as shown in Fig. 1 and insert the mounting bolt. Then, position the washer around the mounting bolt, and turn the grip to tighten securely.

(1)Mounting bolt (2)(3) Main pipe

(4)Engine side

(5)Stopper

(6)Washer

(7)Grip

(8)Insert

(9)Loop handle

(10)Loosen

(11)Tighten

INSTALLING HANDLE (BCZ4000DW)

•Loosen the 4bolts on the upper cap and insert the handle. Retighten the bolts securely.

INSTALLING HANDLE (BCZ4200CL)

•Loosen the handle knob to open the bracket and in- sert the handle. Retighten the knob securely.

INSTALLING CUTTING ATTACHMENT GUARD

•Attach the cutting attachment guard with the bolts provided to the shaft.

INSTALLING BLADE

1.Put the angled bar(1) into the side holes of the inner holder and the gearcase.

2.Remove the nut (Lefthanded) and the outer holder(3) from the gearshaft.

3.Put the blade onto the inner holder(2). Make the marked side face the holder.

4.Put the outer holder(3) onto the gearshaft making the recessed side face the blade.

5.Fasten the blade by the nut and the cover(4).

INSTALLING LINE HEAD

1.While locking the gear shaft by inserting the supplied tool into the upper holder on the gear box, loosen and remove the nut (left-handed).

2.Fit the line head assembly to the gear shaft. Hand tighten it securely.

CUTTING ATTACHMENT GUARD SKIRT FOR LINE HEAD

•When using line head, make sure to attach the guard skirt.

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head aparting from the ground when using it.

GB-8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BCZ4000DL BCZ4000DW BCZ4200CL 1st August Wear head, eye and ear protectionContents Parts locationSpecification Symbols on the machineModel BCZ4000DL BCZ4000DW BCZ4200CLFor safe operation Working ConditionWorking Circumstance Working PlanStarting the Engine Using the ProductBefore Starting Engine Maintenance If Someone ComesHandling Fuel TransportationSet up Fuel Operation Starting EngineCutting head will start rotating upon the en- gine starts Stopping EngineAdjusting Throttle Cable Adjusting Idling SpeedCutter Application Chart Metal Blade UsageCutting Method Controlling Blade BounceCutting Work Line Head Usage Trimming Grass and WeedsMaintenance Adjusting the Line LengthRefilling Trimming Line BladeAIR Filter Fuel FilterStorage DisposalCheck Probable Causes Action Troubleshooting guideLimited warranty

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.
Top Page Image Contents