Zenoah BCZ4200CL, BCZ4000DW If Someone Comes, Maintenance, Handling Fuel, Transportation

Page 7

5. For safe operation

eration or immediately after shutting down the engine. Doing so could result in serious burns or electrical shock.

•IF SOMEONE COMES

1.Guard against hazardous situa- tions at all times. Warn adults to keep pets and children away from the area. Be careful if you are ap- proached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, al- ways be sure to turn off the en- gine before turning around.

MAINTENANCE

1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2. Always be sure to turn off the en- gine and disconnect the spark plug wire before performing any maintenance or checking proce- dures.

WARNING

The metallic parts reach high tem- peratures immediately after stop- ping the engine.

3. When replacing the cutting at- tachment or any other part, or when replacing the oil or any lu- bricant, always be sure to use only KOMATSU ZENOAH prod-

ucts or products which have been certified by KOMATSU ZENOAH for use with the KOMATSU ZENOAH product.

4.In the event that any part must be replaced or any maintenance or repair work not described in this manual must be performed, please contact a representative from the store nearest KOMATSU ZENOAH authorized servicing dealer for assistance.

5.Do not use any accessory or at- tachment other than those bear- ing the KOMATSU ZENOAH mark and recommended for the unit.

6.Under no circumstances should you ever take apart the product

BCZ4000DL / BCZ4000DW / BCZ4200CL

or alter it in any way. Doing so

 

might result in the product be-

 

coming damaged during opera-

 

tion or the product becoming un-

 

able to operate properly.

G

HANDLING FUEL

B

 

1. The engine of the KOMATSU

 

ZENOAH product is designed to

 

run on a mixed fuel, which con- tains highly flammable gasoline. Never store cans of fuel or refill the tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, weld- ing sparks, or any other source of heat or fire which might ignite the fuel.

2.Never smoke while operating the unit or refilling its fuel tank.

3.When refilling the tank, always

turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames any- where nearby before refueling.

4.Wipe spilled fuel completely us- ing a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 3 m or more away from where it was refueled before turning on the en- gine.

TRANSPORTATION

1. When hand-carrying the product, cover over the cutting part if nec- essary, lift up the product and carry it paying attention to the blade.

2. Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank dur- ing transport.

GB-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents BCZ4000DL BCZ4000DW BCZ4200CL Wear head, eye and ear protection 1st AugustParts location ContentsBCZ4000DL BCZ4000DW BCZ4200CL SpecificationSymbols on the machine ModelWorking Plan For safe operationWorking Condition Working CircumstanceBefore Starting Engine Using the ProductStarting the Engine Transportation MaintenanceIf Someone Comes Handling FuelSet up Fuel Stopping Engine OperationStarting Engine Cutting head will start rotating upon the en- gine startsMetal Blade Usage Adjusting Throttle CableAdjusting Idling Speed Cutter Application ChartTrimming Grass and Weeds Cutting MethodControlling Blade Bounce Cutting Work Line Head UsageAdjusting the Line Length MaintenanceFuel Filter Refilling Trimming LineBlade AIR FilterDisposal StorageLimited warranty Troubleshooting guideCheck Probable Causes Action

BCZ4200CL, BCZ4000DW specifications

Zenoah, a renowned name in the outdoor power equipment industry, has made a significant impact with its innovative line of brushcutters, particularly the BCZ4000DW and BCZ4200CL models. Designed to meet the demands of both professional landscapers and avid gardeners, these brushcutters combine power, efficiency, and user-friendly features.

The Zenoah BCZ4000DW is equipped with a robust 40cc engine that combines impressive performance with reduced emissions, complying with stringent environmental standards. This model features a lightweight design, making it highly maneuverable and easy to handle for extended periods. The ergonomically designed handles reduce operator fatigue, ensuring comfort during long cutting sessions. One notable feature is its Easy Start system, which simplifies ignition, allowing users to get to work without frustrating pull starts.

On the other hand, the BCZ4200CL takes power a step further with a 42.5cc engine, delivering enhanced torque and efficiency. This model is particularly suited for heavier-duty tasks, such as clearing dense brush and overgrown areas. Its 2-in-1 head allows for convenient switching between cutting blades and nylon trimmer line, providing versatility for various landscaping needs. The bike handle design enhances stability and control, making it an ideal choice for professional users who require precision in their work.

Both models employ advanced anti-vibration technology, which minimizes hand fatigue and strain, promoting user comfort and safety. The fuel-efficient design maximizes runtime, ensuring that users can complete their tasks without frequent refueling. Additionally, the durable construction of the BCZ4000DW and BCZ4200CL models ensures longevity in challenging working environments.

Maintenance is made easy thanks to the accessible air filter and tool-less fuel cap, allowing for quick checks and refills. These features contribute to the overall reliability of the machines. With Zenoah’s commitment to quality, both the BCZ4000DW and BCZ4200CL are backed by a solid warranty, offering peace of mind for users.

In conclusion, the Zenoah BCZ4000DW and BCZ4200CL brushcutters stand out in the market for their blend of power, efficiency, and user-friendly features. Whether tackling tough vegetation or maintaining a tidy garden, these models provide the performance needed to get the job done effectively and comfortably.
Top Page Image Contents