Before Starting Engine, Starting the Engine

5. For safe operation

BEFORE STARTING

THE ENGINE

1. The area within a perimeter of

15 m of the person using the product should be considered a hazardous area into which no one should enter. If necessary, yellow warning rope, warning signs should be placed around the pe- rimeter of the area. When work is to be performed simultaneously by two or more persons, care should also be taken to constantly look around or otherwise check for the presence and locations of other people working so as to maintain a distance between each person sufficient to ensure safety.

2.Check the condition of working area to avoid any accident by hit- ting hidden obstacles such as stumps, stones, cans, or broken glass.

IMPORTANT

Remove any obstacle before begin- ning work.

3.Inspect the entire unit for loose fasteners and fuel leakage. Make sure that the cutting attachment

is properly installed and securely fastened.

4. Be sure the debris guard is firmly attached in place.

5. Always use the shoulder strap. Adjust the strap for comfort be- fore starting the engine. The strap should be adjusted so the left hand can comfortably hold the handlebar grip approximately waist high.

STARTING THE ENGINE

1. Keep bystanders and animals at least 15 m away from the operat- ing point. If you are approached, immediately stop the engine.

2. The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting

part nor the throttle come into contact with any obstacle when the engine starts.

WARNING	G
Never place the throttle into the	B
high-speed position when starting
the engine.

3.After starting the engine, check to make sure that the cutting at- tachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized KOMATSU ZENOAH servicing dealer for re- pair.

USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the

level necessary.

4. If the unit starts to shake or vi- brate, turn off the engine and check the whole unit. Do not use it until the trouble has been prop- erly corrected.

5. Keep all parts of your body away from rotating cutting attachment and hot surfaces.

6.Never touch the muffler, spark plug, or other metallic parts of the

engine while the engine is in op- eration or immediately after shut- ting down the engine. Doing so

GB-7

BC2002, TR2001 specifications

The Zenoah TR2001 and BC2002 are reputable models in the line of high-performance outdoor power equipment produced by Zenoah, a company known for its commitment to innovation and efficiency in engine design. These models highlight advanced technology and user-centric features, making them popular choices among landscaping professionals and enthusiasts alike.

The Zenoah TR2001 is a robust trimmer designed to deliver exceptional cutting performance and reliability. It utilizes a powerful 21.2 cc two-stroke engine that provides a balance of high power output and low weight. The engine’s design incorporates a unique ignition system that ensures quick starts and smooth acceleration, reducing operator fatigue during extended use. This model is also equipped with anti-vibration technology, which minimizes hand discomfort, allowing users to work longer without strain.

On the other hand, the Zenoah BC2002 is a versatile brush cutter that showcases similar engineering excellence. It also features a strong 21.2 cc engine and is tailored for cutting through thick vegetation with ease. One of the standout characteristics of the BC2002 is its adjustable handle system, which can be modified to different positions to enhance ergonomics and comfort. This feature significantly aids in maneuverability, especially when tackling challenging terrains.

Both models boast a lightweight design, with engineered materials that ensure durability without compromising portability. The fuel-efficient engine design allows for longer operational periods between refueling, which is crucial for professionals who depend on extended performance hours. Additionally, both the TR2001 and BC2002 come equipped with easy-to-use controls, making them accessible for users of all skill levels.

In terms of maintenance, Zenoah has kept these models simple. The air filtration system is designed for easy access, making routine checks and replacements hassle-free. This attention to maintenance ensures that users can keep their equipment in top condition with minimal downtime.

Overall, the Zenoah TR2001 and BC2002 stand out in the market for their powerful engines, user-friendly design, and advanced technologies that cater to both professional and casual users. With their impressive features, these models exemplify Zenoah's dedication to quality and performance in outdoor power tools. Whether tackling tough brush or maintaining a beautifully landscaped property, these machines deliver reliability and efficiency on every job.