Zenoah GZ7000 manual Bar and chain combinations, Applies to Europe only

Page 38

TECHNICAL DATA

Bar and chain combinations

The following recommended combinations of bar and saw chain are type approved for your chain saw.

 

 

Bar

 

 

 

Chain

 

 

 

 

 

 

 

 

Length, inch

Art No.

Pitch, inch

Gauge, mm

Max. nose

Type

 

Length, drive

radius

 

links (no.)

 

 

 

 

 

 

 

 

20

522 81 01-72

3/8

1,5

11T

Oregon 73 LPX

 

72

 

 

 

 

 

 

 

 

24

510 27 87-84

3/8

1,5

11T

Oregon 73 LPX

 

84

 

 

 

 

 

 

 

 

28

510 27 87-92

3/8

1,5

11T

Oregon 73 LPX

 

92

 

 

 

 

 

 

 

 

Saw chain filing and file gauges

For file gauges, see recommendations from manufacturer (www.oregonchain.com).

EC-declaration of conformity

(Applies to Europe only)

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain saw ZENOAH GZ7000 from 2008’s serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number), is in conformity with the requirements of the COUNCIL’S DIRECTIVES:

-of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.

-of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.

-of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.

For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:

EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11681-1:2004

Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for EC type examination in accordance with annex VI, have the numbers: 404/08/1261

In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The certificates have the numbers: 01/161/077.

The supplied chain saw conforms to the example that underwent EC type examination.

Huskvarna 31 October 2008

Bengt Frögelius, Development director chainsaw R & D

38 – English

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator’s manual Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents What is WHAT? What is what on the chain saw?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesChain Cutting equipment designed to reduce kickbackBar Injuries Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Filling with chain oil Lubricating cutting equipmentWhich could lead to serious, even fatal injuries Chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Fitting a spike bumper AssemblyFitting the bar and chain Protect your hands from injuryFuel Handling FuelTransport and storage Fuel safetyFuelling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique TermsLimbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatDirectional cuts Felling cutFreeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburettor adjustment Checking brake band wear Correctly adjusted carburettorHigh speed jet H Checking the front hand guardChecking the inertia brake release ImmediatelyMuffler Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springLubricating the bar tip sprocket Air filterSpark plug Must always be replacedRunning when making adjustments Adjustment of the oil pumpDust Free centrifugal cleaning Needle bearing lubricationFitting the winterising kit Temperature 0C or colderWinter use Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataApplies to Europe only Bar and chain combinationsSaw chain filing and file gauges EC-declaration of conformity EN ISO 12100-22003, Cispr 122005, EN ISOLimited Warranty Limited warranty1151332-26
Top Page Image Contents