Zenoah GZ7000 manual What is WHAT?, What is what on the chain saw?

Page 4

WHAT IS WHAT?

								28	1
								28
										2
										3
										4
							29	9
								9
10		11		12	13					5
10		11		12	13
								8	7	6
										25
						14		15	26
								27
24	23	22	21	20	19	18	17	16		GZ7000

What is what on the chain saw?

1	Decompression valve	16	Chain
2	Starter handle	17	Bar
3	Adjuster screws carburettor	18	Spike bumper
4	Stop switch (Ignition on/off switch.)	19	Chain catcher
5	Rear handle	20	Chain tensioning screw
6	Choke control/Start throttle lock	21	Oil pump adjustment screw
7	Fuel tank	22	Clutch cover
8	Starter	23	Right hand guard
9	Chain oil tank	24	Throttle control
10	Throttle lockout	25	Operator′s manual
11	Cylinder cover	26	Combination spanner
12	Front handle	27	Bar guard
13	Front hand guard	28	Information and warning decal
14	Mufﬂer	29	Product and serial number plate
15	Bar tip sprocket

4 – English

Image 4

Contents Operator’s manual Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents What is WHAT? What is what on the chain saw?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Throttle lockout Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMufﬂer General rulesCutting equipment designed to reduce kickback BarChain Injuries Some terms that describe the bar and chainSharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain Lubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationNeedle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Assembly Fitting the bar and chainFitting a spike bumper Protect your hands from injuryFuel Handling FuelFuel safety FuellingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsLimbing Tree felling technique Safe distanceFelling direction Clearing the trunk and preparing your retreatDirectional cuts Felling cutGeneral advice Freeing a tree that has fallen badlyFreeing a trapped tree Cutting trees and branches that are in tensionWhat is kickback? How to avoid kickbackCutting the trunk into logs Carburettor adjustment MaintenanceGeneral Correctly adjusted carburettor High speed jet HChecking brake band wear Checking the front hand guardChecking the inertia brake release ImmediatelyMufﬂer Starter Changing a broken or worn starter cordTensioning the recoil spring Changing a broken recoil springAir ﬁlter Spark plugLubricating the bar tip sprocket Must always be replacedAdjustment of the oil pump Dust Free centrifugal cleaningRunning when making adjustments Needle bearing lubricationWinter use Temperature 0C or colderFitting the winterising kit Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain ﬁling and ﬁle gauges EC-declaration of conformityApplies to Europe only EN ISO 12100-22003, Cispr 122005, EN ISOLimited Warranty Limited warranty1151332-26