Zenoah CHT2301, HT2301 manual OP8 OP9, Hedge Trimming Techniques,  19 

Page 19

7. Operation

OP8

OP9

OP10

OP11

HEDGE TRIMMING TECHNIQUES

Trim sides of a hedge first, and then the top.

Vertical cut:

With the single-sided blade hedge-trimmer, model HT2301 always cut from the bottom up (OP8). With the 2-sided blade model CHT2301 use an arcing cut from the bottom upwards, then downwards to use both sides of the blades (OP9).

Horizontal cut:

In order to get the best cutting results, slightly tilt the blade (5÷10°) towards the cutting direction (OP10, OP11).

Cut slowly, specially with thick hedges.

WARNING

Always follow the safety precautions.

The hedge-trimmer must only be used to trim hedges or small bushes. It is forbidden to cut other types of material. Do not use the hedge- trimmer as a lever to lift, move or break objects, nor lock it on fixed supports. It is forbidden to apply tools or applications that are not the ones indicated by the manufacturer onto the hedge-trimmer’s power take-off. Do not use it for pruning trees or cutting grass.

19

Image 19
Contents HT2301 CHT2301 Page Contents Safety First 4  Parts location 5  SpecificationsHT2301 CHT2301 6  Wear head, eye and ear protection 7  Symbols on the machine 8  For safe operationWorking Condition Working Circumstance 9  Working PlanStarting the Engine Before Starting the Engine 10  11  Using the ProductIf Someone Comes Maintenance 12  Transportation Handling Fuel 13  Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel  14 For Your Engine LIFE, Avoid Fueling the Unit 15  Starting Engine OperationOP1 OP2 OP3 16 Running in the Engine Adjusting Idling SpeedOP4 OP5 Stopping Engine OP2OP6 OP7 HOW to USE 18  Hedge Trimming Techniques OP8 OP9 19  Maintenance Chart Maintenance 20   21   22  MA4 MufflerIntake AIR Cooling Vent Cylinder fin Intake air cooling vent back 23   24  Troubleshooting guideStorage Check Probable Causes Action 25  Parts list 26  Cutting Unit HT2301 S/N 100101 and up 27   28  Engine Unit HT2301 S/N 100101 and upRCJ6Y  29  30  Cutting Unit CHT2301 S/N 100101 and up 31   32  Engine Unit CHT2301 S/N 100101 and up 33  Manufacturer’s warranty coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans