Installation |
| |
|
|
|
Figure 3-1: Front Panel of the Model 3000TA (Model 3000ZA similar)
All operator controls, except the flow control needle valve, are mounted on the control panel, which is hinged on the left edge and doubles as the door that provides access to the sensor and cell block inside the instrument. The door latch is spring loaded and will swing open when the button in the center of the latch (upper right corner) is pressed all the way in with a narrow gauge tool (less than 0.18 inch wide). Allow clearance for the door to open in a
Figure 3-2: Required Front Door Clearance
Teledyne Analytical Instruments | 14 |
