Teledyne 3000ZA-3X Installation, Unpacking the Analyzer, Mounting the Analyzer

Trace Oxygen Analyzer Installation

Installation

Installation of the Model 3000ZA Analyzer includes:

1.Unpacking

2.Mounting

3.Gas connections

4.Electrical connections

5.Installing the sensor

6.Testing the system.

3.1Unpacking the Analyzer

The analyzer is shipped with all the materials you need to install and prepare the system for operation. Carefully unpack the analyzer and inspect it for damage. Immediately report any damage to the shipping agent.

3.2 Mounting the Analyzer

The Model 3000ZA is for indoor use in a general purpose area. It is NOT for hazardous environments of any type.

The standard model is designed for flush panel mounting. Figure 3-1 is an illustration of the 3000TA standard front panel (the 3000ZA is similar) and mounting bezel. There are four mounting holes—one in each corner of the rigid frame. Drawings at the back of this manual illustrate the dimensions and mounting hole spacing for this unit.

On special order, a 19" rack-mounting panel can be provided. For rack mounting, one or two 3000 series analyzers can be flush-panel mounted on the rack panel. See Appendix for dimensions of the mounting panel.

Teledyne Analytical Instruments 13