PRODUCT CHARACTERISTICS
TECHNICAL DATA
*Total gross capacity: 318 L
*Refrigerator net capacity: 221L
*Freezer net capacity: 76 L
*Freezing capacity: 12 kg / 24h
*Storage time in power failure: 20h
*Daily energy consumption: 0.90 kWh
*Monthly energy consumption: 27 kWh
*Annual energy consumption: 328 kWh
*Power supply: 230V ~ 50Hz
*Colour: Inox
FEATURES
*Efficiency rating */***
*Climate class
*Energy rating A
*Compressors: 2
*R600a refrigerant
*Outside inox handle
*Fridge - Freezer
MAIN FUNCTION
*Control panel (electronical)
*External control panel
*Automatic Defrosting (refrigerator)
*Spacious bottle shelf
*Durable and ergonomic shelves
*Adjustable shelves
*Universal doors
*
*Fan
DIMENSION FOR TRANSPORT
*Height: 1904 mm
*Width: 630 mm
*Depth: 715 mm
*Weight: 90.5 kg
DIMENSION
*Height: 1850 mm
*Width: 595 mm
*Depth: 600 mm
*Weight: 87.5 kg
INSTALLATION
When placing, moving or lifting the refrigerator:
*Do not place it in a horizontal position or tilted more than 40oC.
*Do not hold the door handle, pull the condenser at the back or touch the compressor unit.
The appliance should be installed in a dry, well ven- tilated room. The ambient temperature should not drop below 16oC or rise above 32oC otherwise mal- function may occur.
The installation location should not be exposed to direct sunlight and not be near a heat source such as an oven, radiator etc.
CONNECTION TO THE POWER SUPPLY
To ensure the correct functioning of the appliance let it stand for at least 2 hrs once fitted to its final location before connecting it to the mains.
Connect the appliance to a system of alternating current, 230V/50Hz through a properly installed socket.
FITTING INSTRUCTIONS
The instructions given are for a right hand hinged appliance.
If the appliance has been converted to have hinges on the left hand side, the instructions will need to be adapted accordingly.
The distance between the side of the built in fridge/freezer kitchen cabinet and a wall should be at least 13.5 cm in order to ensure free opening of the door.
The dimensions for the kitchen cabinet housing the fridge/freezer should be as per Fig.1.
An air vent must be fitted on the cabinet plinth to ensure the correct functioning of the appliance. The air vent should be at least 200 cm2. The back space between the cabinet side walls should be at least 45 mm wider and 562 mm long. (Fig.2)
Having the cabinet fitted as per Fig.1, place the appliance into the cabinet, pushing it against the wall on the hinge side (Fig.3)
Insert the upper cover strip 5 between the appli- ance and the upper wall to the cabinet (Fig.4) and
6