Teledyne 3000ZA-3X operating instructions Menu/Screen Structure, Analyze Screen, System Menu

Operation 3000ZA-3X

4.2.2.4SPECIAL FUNCTION KEYS

Pressing any of the 7 Function keys (ANALYZE / SYSTEM / SPAN / ZERO / ALARMS /RANGE / STANDBY) Cause the display to show the top level menu for the respective function. If another menu operation was being performed, any modified parameters (that had not yet been accepted by using the ENTER key) will be discarded and replaced by the original values.

4.3 Menu/Screen Structure

The 3000 screen setup consists of several classes of screens and items. No item occupies more than 1 line. It is important to read and understand the NAVIGATION AND DATA ENTRY section to fully understand the menu structure.

4.3.1 Analyze Screen

The ANALYSIS SCREEN displays the following:

Line 1:

-The O2 concentration in ppm or '%' (percent)

-If in Span calibration the message "SPAN".

-If in Zero calibration the message "ZERO".

-Otherwise, the message "ANLZ".

Line 2 (display mode 1):

-If Alarm 1 is alarming, the message "AL-1".

-If Alarm 2 is alarming, the message "AL-2".

-If in Range 1 the message "R1: 0-nnnn.nnppm".

-If in Range 2 the message "R2: 0-nnnn.nnppm".

-If in Range 3 the message "R3: 0-nnnn.nnppm".

-or, if range is in percent, "Rx: 0-nnn.nn%".

4.3.2System Menu

The SYSTEM screen can be accessed by pressing the SYSTEM key and it has the following functions:

Teledyne Analytical Instruments 30