Assembly/Pre-Operation

Your new tiller has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED FOR

ASSEMBLY

A socket wrench set will make assembly easier. Standard wrench sizes are listed.

(1)Utility knife

(2)1/2 Wrench

OPERATOR’S POSITION

When right or left hand is mentioned in this manual, it means when you are in the oper- ating position (standing behind tiller handles).

Front

overhead_views_7

Left Right

Operator’s Position

UNPACK CARTON & INSTALL HANDLE

CAUTION: Be careful of exposed sta- ples when handling or disposing of carton- ing material.

IMPORTANT: When unpacking and assem- bling tiller, be careful not to stretch or kink cable(s).

1.Cut cable ties securing handle column.

2.Route cable(s) as shown and slide handle column onto handle mount.

3.Remove all packing from carton.

4.Secure handle column using two (2) carriage bolts and two (2) ﬂange lock- nuts. Tighten securely.

5.Cut away carton.

6.Route tine control cable(s) through plastic cable clip on handle mount.

NOTE: Cables must not touch the mufﬂer.

7.Cut cable ties securing tiller to skid. Remove tiller from skid by pulling back- wards.

8.Remove screws securing depth stake to skid and discard the screws.

Tine

Control

Tine
Control
Handle Cable	Handle
Mount	Column

Carriage

Bolt

Flange

Locknut

INSTALL DEPTH STAKE

ASSEMBLY

1.Loosen nut “A”.

2.Insert stake support between engine bracket halves with stake spring down.

3.Bolt stake support to engine brackets with bolts, lock washers and nuts. Tighten securely. Tighten nut “A”.

4.Depth stake must move freely. If it does not, loosen support bolt.

Engine Bracket Halves

Nut “A”

Depth Stake Support

Depth

Stake

Support Bolt

Stake Spring

Hex Bolts, Lock Washers, and hex Nuts

HANDLE HEIGHT

•Handle height may be adjusted to better suit operator. (See “HANDLE HEIGHT” in the Service and Adjustments section of this manual).

TILLING WIDTH

•Tilling width may be adjusted to better handle your tilling conditions (See “TINE ARRANGEMENT” in the Service and Adjustments section of this manual).

TINE OPERATION

•Check tine operation before ﬁrst use. (See “TINE OPERATION CHECK” in the Service and Adjustments section of this manual).

917.29149 specifications

The Sears 917.29149 is a lawn tractor that exemplifies efficiency and durability, making it a popular choice for homeowners and landscaping professionals alike. Designed to tackle a variety of mowing tasks, this robust machine boasts several key features and technologies that enhance its functionality and ease of use.

One of the standout characteristics of the Sears 917.29149 is its powerful engine. It typically comes equipped with a dependable gas engine that provides ample power and torque, allowing it to handle not just mowing but also towing and hauling tasks. This makes it suitable for larger properties where versatility is essential. The engine is designed for reliability, enabling users to tackle tough grass and uneven terrain without compromising performance.

The cutting deck of the Sears 917.29149 is another significant attribute. Equipped with a wide cutting width, typically around 42 to 54 inches, it allows for efficient mowing in fewer passes, saving time and effort. The cutting height can usually be adjusted easily, offering users the ability to customize their mowing height according to the seasonal requirements of their lawn. This level of customization is crucial for maintaining a healthy lawn while also accommodating different grass types.

In terms of maneuverability, the Sears 917.29149 features a well-designed steering system that allows for easy navigation around obstacles. The turning radius is tight, making it simple to mow around trees, flower beds, and other landscaping elements without leaving uncut patches of grass. The comfortable seat and ergonomic controls ensure that users can operate the tractor for extended periods without fatigue.

Technologically, the Sears 917.29149 may include advanced features such as a hydrostatic transmission. This system provides seamless speed adjustments without the need for manual gear shifting, making operation smoother and more intuitive. Additionally, models may offer features like cruise control, allowing the operator to maintain a consistent speed, which is particularly useful for larger mowing jobs.

Moreover, the tractor’s attachment compatibility further enhances its utility, enabling users to add accessories such as bags for grass clippings, snow plows, or other tools for year-round use. This transforms the lawn tractor into a multifunctional piece of equipment, capable of handling various yard maintenance tasks.

Overall, the Sears 917.29149 stands as an exemplary lawn tractor that combines power, efficiency, and versatility. Its well-thought-out features and technologies make it a reliable choice for anyone looking to maintain their lawn with ease and precision. Whether for residential use or light commercial tasks, this tractor represents a solid investment for effective lawn care.