Sears 917.29149 owner manual To Start Engine, ADD Gasoline

Page 9

4.Tilt tiller back on its wheels and then re-level.

5.With engine level, refill to point of over-

flowing if necessary. Replace oil filler plug.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Mainte- nance section of this manual).

•To change engine oil, see the Mainte- nance section of this manual.

Oil Level

Oil Filler

Plug

 

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide depos- its and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quan- tities that can be used within 30 days to

assure fuel freshness.

CAUTION: Fill to within 1/2 inch of top of fuel tank to prevent spills and to allow for fuel expansion. If gasoline is acci- dentally spilled, move machine away from area of spill. Avoid creating any source of ignition until gasoline vapors have disap- peared.

Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in temper- atures below32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separa- tion and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days

or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE

CAUTION: Keep tine control in “OFF” position when starting engine.

When starting engine for the first time or if engine has run out of fuel, it will take extra pulls of the recoil starter to move fuel from the tank to the engine.

1.Make sure spark plug wire is properly connected.

2.Place throttle control in “FAST” posi- tion.

3.Move choke control to full “CHOKE” position. Grasp recoil starter handle with one hand and grasp tiller handle with other hand. Pull rope out slowly until engine reaches start of compres- sion cycle (rope will pull slightly harder at this point).

4.Pull recoil starter handle quickly. Do

not let starter handle snap back against starter. Repeat if necessary.

NOTE: If engine fires but does not start, move choke control to half choke posi- tion. Pull recoil starter handle until engine starts.

5.When engine starts, slowly move choke control to “RUN” position as engine warms up.

NOTE: A warm engine requires less choking to start.

6.Move throttle control to desired running position.

7.Allow engine to warm up for a few

minutes before engaging tines. NOTE: If at a high altitude (3000 feet) or in cold temperatures (below 32°F), the carburetor fuel mixture may need to be adjusted for best engine performance. See “TO ADJUST CARBURETOR” in the Service and Adjustments section of this manual.

NOTE: If engine does not start, see trou- bleshooting points.

Spark Plug

Throttle

Control

Choke

Control

Recoil Starter

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Front Tine Tiller Table of Contents WarrantySafety Rules Operation Maintenance and StorageSears Installation Service Product SpecificationsCustomer Responsibilities Repair Protection AgreementsUnassembled Parts AccessoriesASSEMBLY/PRE-OPERATION Know Your Tiller OperationStopping HOW to USE Your TillerTilling Depth StakeADD Gasoline To Start EngineBreaking in Your Tiller Tilling HintsCultivating Lubrication Chart MaintenanceGeneral Recommendations Before Each USEEngine AIR CleanerLubrication To Change Engine OILCooling System CleaningSpark Plug TransmissionTo Adjust Handle Height Service and AdjustmentsTiller Tine ArrangementTo Adjust Carburetor To Remove Belt GuardTo Replace V-BELT Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting ChartEngine Page Get it fixed, at your home or ours

917.29149 specifications

The Sears 917.29149 is a lawn tractor that exemplifies efficiency and durability, making it a popular choice for homeowners and landscaping professionals alike. Designed to tackle a variety of mowing tasks, this robust machine boasts several key features and technologies that enhance its functionality and ease of use.

One of the standout characteristics of the Sears 917.29149 is its powerful engine. It typically comes equipped with a dependable gas engine that provides ample power and torque, allowing it to handle not just mowing but also towing and hauling tasks. This makes it suitable for larger properties where versatility is essential. The engine is designed for reliability, enabling users to tackle tough grass and uneven terrain without compromising performance.

The cutting deck of the Sears 917.29149 is another significant attribute. Equipped with a wide cutting width, typically around 42 to 54 inches, it allows for efficient mowing in fewer passes, saving time and effort. The cutting height can usually be adjusted easily, offering users the ability to customize their mowing height according to the seasonal requirements of their lawn. This level of customization is crucial for maintaining a healthy lawn while also accommodating different grass types.

In terms of maneuverability, the Sears 917.29149 features a well-designed steering system that allows for easy navigation around obstacles. The turning radius is tight, making it simple to mow around trees, flower beds, and other landscaping elements without leaving uncut patches of grass. The comfortable seat and ergonomic controls ensure that users can operate the tractor for extended periods without fatigue.

Technologically, the Sears 917.29149 may include advanced features such as a hydrostatic transmission. This system provides seamless speed adjustments without the need for manual gear shifting, making operation smoother and more intuitive. Additionally, models may offer features like cruise control, allowing the operator to maintain a consistent speed, which is particularly useful for larger mowing jobs.

Moreover, the tractor’s attachment compatibility further enhances its utility, enabling users to add accessories such as bags for grass clippings, snow plows, or other tools for year-round use. This transforms the lawn tractor into a multifunctional piece of equipment, capable of handling various yard maintenance tasks.

Overall, the Sears 917.29149 stands as an exemplary lawn tractor that combines power, efficiency, and versatility. Its well-thought-out features and technologies make it a reliable choice for anyone looking to maintain their lawn with ease and precision. Whether for residential use or light commercial tasks, this tractor represents a solid investment for effective lawn care.
Top Page Image Contents