Poulan MRT500 owner manual Adjust Wheels for Cultivating See Figs

Page 11

OPERATION

CULTIVATING

Cultivating is destroying the weeds between rows to pre- vent them from robbing nourishment and moisture from the plants. At the same time, breaking up the upper layer of soil crust will help retain moisture in the soil. Best digging depth is 1" to 3" (2.5-7.5 cm). Lower the outer side shields to protect small plants from being buried.

•Cultivate up and down the rows at a speed which will allow tines to uproot weeds and leave the ground in rough condition, promoting no further growth of weeds and grass (See Fig. 15).

FIG. 15

ADJUST WHEELS FOR CULTIVATING (See Figs. 16 and 17)

•Place blocks under right hand side of tiller and remove hairpin clip and clevis pin from right hand wheel.

•Move wheel outward approximately 1 inch (2.5 cm) until hole in inner wheel hub lines up with inner hole in axle.

•Replace clevis pin and hairpin clip on inside of wheel and remove blocks.

•Repeat preceding steps on left hand side.

NOTE: In extremely rough conditions and while cultivat- ing, the wheels should be moved outward on the axle for increased stability.

OUTER VIEW OF TIRE

CLEVIS

PIN

HAIRPIN

CLIP

tire_1

FIG. 16

INNER VIEW OF TIRE

CLEVIS

PIN

HAIRPIN

CLIP

ti 2

FIG. 17

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model NO. MRT500 Preparation Safety RulesMaintenance and Storage TrainingTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateKnow Your Tiller Meets Ansi Safety RequirementsOperation Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTilling Hints Tine Shear PinsTo Start Engine See Fig Cultivating Adjust Wheels for Cultivating See FigsGeneral Recommendations MaintenanceMaintenance Schedule AIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTo Adjust Handle Height See Fig TillerTine Replacement See Figs , 25 To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTo Remove Belt Guard See Fig To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Tiller - Model Number MRT500 MXR500Q Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. Description Tine Shield Tine Assembly Decals Limited Warranty

MRT500 specifications

The Poulan MRT500 is a versatile and powerful addition to the Poulan line of outdoor equipment, designed to meet the diverse needs of homeowners and landscaping professionals alike. This robust machine is primarily engineered for those tackling tougher yard tasks, such as tilling, cultivating, and preparing garden beds for planting.

At the heart of the MRT500 is a reliable engine that delivers outstanding performance. Featuring a 500cc four-stroke engine, it provides ample power for various gardening applications. This engine is designed for fuel efficiency, ensuring longer runtimes and reduced emissions while maintaining high torque levels needed for breaking up tough soil. The MRT500 also incorporates an easy-start mechanism, allowing users to get to work without the frustration of cumbersome starting procedures.

One of the standout characteristics of the MRT500 is its adjustable tilling width, which can be modified to suit different gardening needs. This flexibility allows users to till narrow rows for small gardens or wider paths for larger landscapes, making it an excellent choice for both casual gardeners and serious landscapers. The tilling depth can also be adjusted, ensuring maximum soil aeration and preparation, which is crucial for successful planting.

The machine is equipped with durable and robust tines that are designed to penetrate a variety of soil types, enabling effective tilling whether in clay, sandy, or loamy conditions. The tines can withstand the rigors of heavy use, ensuring longevity and performance consistency throughout the season.

In terms of user comfort, the MRT500 features ergonomic handles that are adjustable for height, making it suitable for users of varying stature. This focus on user experience reduces strain during operation, which is especially beneficial during extended work sessions. The lightweight design of the machine also allows for easy maneuverability, making it practical for both tight spaces and larger areas.

Additional features include a compact design for easy storage and transportation, as well as a straightforward assembly process, allowing users to set up the MRT500 quickly. With its combination of power, versatility, and user-friendly design, the Poulan MRT500 is an invaluable tool for any landscaping enthusiast or professional, ready to tackle a range of gardening projects with ease and efficiency. Whether preparing a new garden or maintaining an existing one, this tiller is sure to impress with its performance and reliability.
Top Page Image Contents