Poulan MRT500 owner manual Table of Contents

Page 3

PRODUCT SPECIFICATIONS

Gasoline Capacity:

3 Quarts (2.8L)

 

Unleaded Regular

 

 

Oil (API-SF-SJ):

SAE 30 (Above 32°F/0°C)

(Capacity: 20 oz./0.6L)

SAE 5w-30 (Below 32°F/0°C)

 

 

Spark Plug :

Champion RC12YC

(Gap: .030"/0.76mm)

 

CONGRATULATIONS on your purchase of a new tiller. It has been designed, engineered and manufactured to give you the best possible dependability and performance.

Should you experience any problems you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your tiller properly. Always observe the “SAFETY RULES”.

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your tiller.

•Follow instructions under “Maintenance” and “Storage” sections of this Owner’s Manual.

IMPORTANT: THIS UNIT IS EQUIPPED WITH AN INTERNAL COMBUSTION ENGINE AND SHOULD NOT BE USED ON OR NEAR ANY UNIMPROVED FOREST-COVERED, BRUSH- COVERED OR GRASS COVERED LAND UNLESS THE ENGINE'S EXHAUST SYSTEM IS EQUIPPED WITH A SPARK ARRESTER MEETING APPLICABLE LOCAL LAWS (IF ANY). IF A SPARK ARRESTER IS USED, IT SHOULD BE MAINTAINED IN EFFECTIVE WORKING ORDER BY THE OPERATOR.

IN THE STATE OF CALIFORNIA, A SPARK ARRESTER IS REQUIRED BY LAW (SECTION 4442 OF THE CALIFORNIA PUBLIC RESOURCES CODE). OTHER STATES MAY HAVE SIMILAR LAWS. FEDERAL LAWS APPLY ON FEDERAL LANDS. SEE YOUR AUTHORIZED SERVICE CENTER FOR SPARK ARRESTER.

TABLE OF CONTENTS

SAFETY RULES

2

CUSTOMER RESPONSIBILITIES

3

PRODUCT SPECIFICATIONS

3

ASSEMBLY

4-6

OPERATION

7-11

MAINTENANCE SCHEDULE

12

MAINTENANCE

12-14

SERVICE & ADJUSTMENTS

15-18

STORAGE

19

TROUBLESHOOTING

20

REPAIR PARTS-TILLER

21-27

WARRANTY

28

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model NO. MRT500 Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTine Shear Pins To Start Engine See FigTilling Hints Cultivating Adjust Wheels for Cultivating See FigsMaintenance Maintenance ScheduleGeneral Recommendations AIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTire Care Service and AdjustmentsTo Adjust Handle Height See Fig TillerTine Replacement See Figs , 25 Ground Drive Belt Adjustment See Fig To Remove Belt Guard See FigTo Replace Ground Drive Belt See Figs To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Tiller - Model Number MRT500 MXR500Q Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. Description Tine Shield Tine Assembly Decals Limited Warranty

MRT500 specifications

The Poulan MRT500 is a versatile and powerful addition to the Poulan line of outdoor equipment, designed to meet the diverse needs of homeowners and landscaping professionals alike. This robust machine is primarily engineered for those tackling tougher yard tasks, such as tilling, cultivating, and preparing garden beds for planting.

At the heart of the MRT500 is a reliable engine that delivers outstanding performance. Featuring a 500cc four-stroke engine, it provides ample power for various gardening applications. This engine is designed for fuel efficiency, ensuring longer runtimes and reduced emissions while maintaining high torque levels needed for breaking up tough soil. The MRT500 also incorporates an easy-start mechanism, allowing users to get to work without the frustration of cumbersome starting procedures.

One of the standout characteristics of the MRT500 is its adjustable tilling width, which can be modified to suit different gardening needs. This flexibility allows users to till narrow rows for small gardens or wider paths for larger landscapes, making it an excellent choice for both casual gardeners and serious landscapers. The tilling depth can also be adjusted, ensuring maximum soil aeration and preparation, which is crucial for successful planting.

The machine is equipped with durable and robust tines that are designed to penetrate a variety of soil types, enabling effective tilling whether in clay, sandy, or loamy conditions. The tines can withstand the rigors of heavy use, ensuring longevity and performance consistency throughout the season.

In terms of user comfort, the MRT500 features ergonomic handles that are adjustable for height, making it suitable for users of varying stature. This focus on user experience reduces strain during operation, which is especially beneficial during extended work sessions. The lightweight design of the machine also allows for easy maneuverability, making it practical for both tight spaces and larger areas.

Additional features include a compact design for easy storage and transportation, as well as a straightforward assembly process, allowing users to set up the MRT500 quickly. With its combination of power, versatility, and user-friendly design, the Poulan MRT500 is an invaluable tool for any landscaping enthusiast or professional, ready to tackle a range of gardening projects with ease and efficiency. Whether preparing a new garden or maintaining an existing one, this tiller is sure to impress with its performance and reliability.
Top Page Image Contents