Poulan MRT500 owner manual To Remove Belt Guard See Fig, To Replace Ground Drive Belt See Figs

Page 17

SERVICE AND ADJUSTMENTS

TO REMOVE BELT GUARD (See Fig. 27)

NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch (2.5 cm).

Remove screws from side of belt guard.

Remove hex nut and washer from bottom of belt guard (located behind wheel).

Pull belt guard out and away from unit.

Replace belt guard by reversing above procedure.

BELT GUARD

SCREW

 

 

HEX NUT AND

 

WASHER

 

(LOCATED

 

BEHIND TIRE)

SCREW

HAIRPIN CLIP AND

 

CLEVIS PIN

FIG. 27

TO REPLACE GROUND DRIVE BELT (See Figs. 27 and 28)

Remove belt guard as described in “TO REMOVE BELT GUARD”.

Remove old belt by slipping off engine pulley first then remove from transmission pulley.

Place new belt in groove of transmission pulley and into engine pulley. BELT MUST BE IN GROOVE ON TOP OF IDLER PULLEY. NOTE POSITION OF BELT TO GUIDES.

Check belt adjustment as described below.

Replace belt guard.

Reposition wheel and replace clevis pin and hairpin clip.

GROUND DRIVE BELT ADJUSTMENT (See Fig. 28)

For proper belt tension, the extension spring should have about 5/8 inch (16 mm) stretch when drive control bar is in “ENGAGED” position. This tension can be attained as follows:

Loosen cable clip screw securing the drive control cable.

Slide cable forward for less tension and rearward for more tension until about 5/8 inch (16 mm) stretch is obtained while the drive control bar is engaged.

Tighten cable clip screw securely.

CABLE CLIP

SCREW

ENGINE

PULLEY

DRIVE CONTROL CABLE

LESS

TENSION

MORE

5/8" TENSION

EXTENSION

SPRING

IDLERTRANSMISSION

PULLEYPULLEY

FIG. 28

17

Image 17
Contents Model NO. MRT500 Maintenance and Storage Safety RulesTraining PreparationTable of Contents OPERATOR’S Position See Fig AssemblyTools Required for Assembly Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation Tine Operation with Wheel Drive HOW to USE Your TillerForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedTurning Before Starting EngineTo Transport ADD GasolineTilling Hints Tine Shear PinsTo Start Engine See Fig Cultivating Adjust Wheels for Cultivating See FigsGeneral Recommendations MaintenanceMaintenance Schedule AIR Filter See Fig EngineMuffler CleaningSpark Plug Cooling System See FigTo Adjust Handle Height See Fig Service and AdjustmentsTiller Tire CareTine Replacement See Figs , 25 To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTo Remove Belt Guard See Fig To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Tiller - Model Number MRT500 MXR500Q Handle AssemblyMAINFRAME, Left Side MAINFRAME, Right Side KEY Part NO. NO. Description Tine Shield Tine Assembly Decals Limited Warranty

MRT500 specifications

The Poulan MRT500 is a versatile and powerful addition to the Poulan line of outdoor equipment, designed to meet the diverse needs of homeowners and landscaping professionals alike. This robust machine is primarily engineered for those tackling tougher yard tasks, such as tilling, cultivating, and preparing garden beds for planting.

At the heart of the MRT500 is a reliable engine that delivers outstanding performance. Featuring a 500cc four-stroke engine, it provides ample power for various gardening applications. This engine is designed for fuel efficiency, ensuring longer runtimes and reduced emissions while maintaining high torque levels needed for breaking up tough soil. The MRT500 also incorporates an easy-start mechanism, allowing users to get to work without the frustration of cumbersome starting procedures.

One of the standout characteristics of the MRT500 is its adjustable tilling width, which can be modified to suit different gardening needs. This flexibility allows users to till narrow rows for small gardens or wider paths for larger landscapes, making it an excellent choice for both casual gardeners and serious landscapers. The tilling depth can also be adjusted, ensuring maximum soil aeration and preparation, which is crucial for successful planting.

The machine is equipped with durable and robust tines that are designed to penetrate a variety of soil types, enabling effective tilling whether in clay, sandy, or loamy conditions. The tines can withstand the rigors of heavy use, ensuring longevity and performance consistency throughout the season.

In terms of user comfort, the MRT500 features ergonomic handles that are adjustable for height, making it suitable for users of varying stature. This focus on user experience reduces strain during operation, which is especially beneficial during extended work sessions. The lightweight design of the machine also allows for easy maneuverability, making it practical for both tight spaces and larger areas.

Additional features include a compact design for easy storage and transportation, as well as a straightforward assembly process, allowing users to set up the MRT500 quickly. With its combination of power, versatility, and user-friendly design, the Poulan MRT500 is an invaluable tool for any landscaping enthusiast or professional, ready to tackle a range of gardening projects with ease and efficiency. Whether preparing a new garden or maintaining an existing one, this tiller is sure to impress with its performance and reliability.