Poulan PRRT875X manual HOW to USE Your Tiller

Page 8

OPERATION

The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses.

00155

HOW TO USE YOUR TILLER

Know how to operate all controls before adding fuel and oil or attempting to start engine.

STOPPING (See Fig. 9)

TINES AND DRIVE

•Release drive control bar to stop movement.

•Move shift lever to “N” (neutral) position.

ENGINE

•Move throttle control to “STOP” position.

•Never use choke to stop engine.

THROTTLE

CONTROLSHIFT

LEVER

DRIVE CONTROL BAR “ENGAGED”

POSITION

DRIVE CONTROL BAR “DISENGAGED” POSITION

FIG. 9

TINE OPERATION - WITH WHEEL DRIVE

•Always release drive control bar before moving shift lever into another position.

•Tine movement is achieved by moving shift lever to

( ) till position and engaging drive control bar.

FORWARD - WHEELS ONLY/TINES STOPPED

•Release drive control bar and move shift lever indicator to “F” (forward) position. Engage drive control bar and tiller will move forward.

REVERSE - WHEELS ONLY/TINES STOPPED

•DO NOT STAND DIRECTLY BEHIND TILLER.

•Release the drive control bar.

•Move throttle control to “SLOW” position.

•Move shift lever indicator to “R” (reverse) position.

•Hold drive control bar against the handle to start tiller movement.

HARD TO SHIFT GEARS

•Briefly engage drive control bar and release or rock tiller forward and backward until are able to shift gears.

DEPTH STAKE (See Fig. 10)

The depth stake can be raised or lowered to allow you more versatile tilling and cultivating, or to more easily transport your tiller.

TRANSPORT

SHALLOWESTPOSITION TILLING

(CULTIVATING)

DEEPEST

TILLING

DEPTH

STAKE

 

 

 

 

 

 

2

 

 

 

 

 

_

 

 

 

 

e

 

 

 

 

k

 

 

 

 

ta

 

 

 

 

s

 

 

 

 

h_

 

 

 

 

 

pt

 

 

 

 

 

 

FIG. 10

TILLING (See Fig. 11)

•Release depth stake pin. Pull the depth stake up for increased tilling depth. Place depth stake pin in hole of depth stake to lock in position.

•Place shift lever indicator in tilling position.

•Hold the drive control bar against the handle to start tilling movement. Tines and wheels will both turn.

•Move throttle control to “FAST” position for deep tilling. To cultivate, throttle control can be set at any desired speed, depending on how fast or slow you wish to cultivate.

IMPORTANT: ALWAYS RELEASE DRIVE CONTROL BAR BEFORE MOVING SHIFT LEVER INTO ANOTHER POSITION.

 

 

DEPTH STAKE PIN

 

 

“RELEASED” POSITION

 

 

 

 

 

“LOCKED”

 

 

 

 

 

POSITION

NUT “B”

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

_

OUTER

NUT “A”

 

e

 

k

 

 

ta

 

 

 

s

 

 

 

SIDE SHIELD

 

_

 

 

 

 

h

 

 

 

 

ept

 

 

 

 

 

d

 

 

 

FIG. 11

TURNING

•Release the drive control bar.

•Move throttle control to “SLOW” position.

•Place shift lever indicator in “F” (forward) position. Tines will not turn.

•Lift handle to raise tines out of ground.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents PRRT875X Safety Rules Maintenance and StorageTraining PreparationTable of Contents Assembly Tools Required for AssemblyContents of Hardware Pack OPERATOR’S Position See FigInstall Handle See Figs , 4, Unpacking Carton See FigAttach Clutch Cable See Fig Connect Shift ROD See FigRemove Tiller from Crate Check Tire PressureKnow Your Tiller Meets Ansi Safety RequirementsOperation HOW to USE Your Tiller ADD Gasoline To TransportBefore Starting Engine Cultivating Tine Shear PinsTilling Hints Maintenance Maintenance ScheduleLubrication Chart General RecommendationsTo Change Engine OIL See Figs AIR Cleaner See FigEngine Cleaning Cooling System See FigMuffler Spark PlugTire Care Service and AdjustmentsTiller Ground Drive Belt Adjustment See Fig To Replace Ground Drive Belt See FigsTine Replacement See Figs , 25, To Adjust Throttle Control Cable See Fig To Adjust CarburetorStorage OtherFuel System Engine OILTroubleshooting Points Service Notes Limited Warranty HOPParts and Service Changere DE Pièces LES ET L’ENTRETIEN Limitée Garantie Dépannage DE Guide Entreposage Supplementaire InformationMoteur MotobineuseRéglages ET Révision MoteurCarburateur LE Régler Pour 27 .FIG25 .FIG 24 .FIG 26 et 2526 .FIG Fig la Voir Terre À D’ENTRAÎNEMENT Courroie LA Régler 23 et 22 .fig les VoirCourroie LA Remplacer Pour Terre À D’ENTRAÎNEMENTFig la Voir Roue LA Enlever Pour Fig la Voir RoiecourDE Protecteur LE Enlever Pour Fig la VoirEntretien Nettoyage’ALLUMAGE Bougie SilencieuxFig la Voir AIR À Filtre LubrificationGénérales Recommandations Lubrification DE Tableau’ENTRETIEN Calendrier LubrificationUtilisation BinageDents DES Cisaillement DE Boulons 15 .FIGLabourage DE Conseils Moteur LE Démarrer Pour14 .FIG 13 .FIGMoteur LE Démarrer DE Avant Extérieurs Latéraux Déflecteurs’ESSENCE Réservoir LE Remplir Transporter PourBineuse Moto Votre Utiliser CommentMENT/LESLESEU ROUES-AVANT Marche LA Avec -FRAISES DES UtilisationAnsi Sécurité DE Exigences AUX Conforme Motobineuse Votre ConnaissezMontage Fig la Voir SetesviFig la Voir Carton LE Deballer Poignee LA InstallerEt 4, 3, .fig les Voir Montage LE Pour Exiges Outils LES Pièces DES SAC DU ContenuFig la Voir D’OPERATEUR Position Produit DE Spécifications SommaireClient DU Responsabilités Sécurité DE Règles Entreposage ET EntretienMotobineuses des Sécurité toute En lUtilisation pour ConseilsCom.pro-poulan.www web site notre Visitez

PRRT875X specifications

The Poulan PRRT875X is a robust and versatile string trimmer designed for both residential and professional landscaping tasks. Known for its lightweight design and powerful performance, this tool caters to individuals looking to maintain their lawns with precision and ease.

One of the standout features of the PRRT875X is its impressive 25cc, 2-cycle gas engine. This enables the trimmer to deliver a strong performance, allowing users to tackle thick grass, weeds, and overgrown areas without hassle. The engine is designed for easy starting, which reduces the frustration often associated with traditional gas-powered trimmers.

The PRRT875X is equipped with a 18-inch cutting swath, providing ample coverage with each pass. This wide cutting width not only saves time but also enhances efficiency, making it easier to trim larger areas quickly. The dual-line design enables a cleaner cut, distributing power evenly across both lines, resulting in improved performance.

Comfort and usability are key considerations in the design of the Poulan PRRT875X. It features an adjustable handle that allows users to customize the grip for better control and comfort during extended use. The curved shaft design also contributes to ease of operation, reducing strain on the user's back and arms while trimming hard-to-reach areas.

The trimmer also employs a 'Tap-N-Go' line advance system. This technology enables users to easily feed more line by simply tapping the head on the ground, minimizing downtime and enhancing overall productivity. Moreover, the cutting head is designed for quick line replacement, which is a significant advantage for users who require frequent blade changes.

Durability is paramount in the design of the PRRT875X. It features a rugged exterior designed to withstand the rigors of outdoor use. Additionally, its lightweight build, weighing approximately 10 lbs, allows for easy maneuverability and transport.

In terms of environmental considerations, the Poulan PRRT875X meets various emissions standards, making it a greener option in the gas-powered trimmer market.

Overall, the Poulan PRRT875X string trimmer combines power, efficiency, and user-friendly features, making it an excellent choice for anyone looking to maintain their landscape effectively. With its robust engine, wide cutting swath, and focus on comfort, it stands out as a reliable tool for homeowners and professionals alike.
Top Page Image Contents