Poulan PRRT65A manual Tine Replacement See Figs , 25

Page 15

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25, and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when handling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

NEW TINE

WORN TINE

FIG. 24

•To maintain the superb tilling performance of this ma- chine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3- 1/2 inches (9 cm), they should be replaced or straight- ened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

TRANSMISSION

TINE

TINE

3-1/2" MAX (9 CM)

FIG. 25

SHARP EDGE

HAIRPIN CLIP

COUNTER

TINE

ROTATION

HAIRPIN CLIP

SHARP EDGES

	SHEAR PIN	SHARP
	SHARP
		EDGES
	EDGE

SHEAR PIN

FIG. 26

SHARP EDGE

15

Image 15

Contents PRRT65A Preparation Safety RulesMaintenance and Storage TrainingTable of Contents Assembly Tools Required for AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Check Tire Pressure Attach Clutch Cable See FigConnect Shift ROD See Fig Remove Tiller from CrateMeets Ansi Safety Requirements OperationKnow Your Tiller Reverse Wheels ONLY/TINES Stopped HOW to USE Your TillerTine Operation with Wheel Drive Forward Wheels ONLY/TINES StoppedADD Gasoline Before Starting EngineTurning To TransportTine Shear Pins Tilling HintsCultivating General Recommendations Maintenance ScheduleLubrication Chart Customer ResponsibilitiesEngine AIR Filter See FigCooling System See Fig Service and Adjustments CleaningTiller Ground Drive Belt Adjustment See Fig To Remove Belt Guard See FigTo Replace Ground Drive Belt See Fig Tine Replacement See Figs , 25, To Adjust Carburetor To Adjust Throttle Control Cable See FigEngine OIL StorageOther Fuel SystemTroubleshooting Points Tiller Model Number PRRT65A Handle AssemblyKEY Part NO. NO. Description MAINFRAME, Left SideMAINFRAME, Right Side Transmission Tine Shield Tine Assembly Decals Service Notes Limited Warranty Parts and Service