Troy-Bilt 645A-Bronco manual Decals, Operating Symbols

Page 5

Section 1: Safety

Decals

For your safety and the safety of others, various safety and operational decals are located on your unit (see Figure 1 below).

Keep the decals clean and legible at all times. Contact your local service dealer or the factory for replacements if any decals are damaged or missing.

Refer to the separate parts catalog for decal locations, part numbers and ordering instructions.

Forward Clutch Control	Reverse Clutch Control
Operating Instruction	Operating Instruction
Starting Stabilization
Message on engine

Warning Messages on tine hood

Hot Surfaces

Warning on belt cover

Figure 1: Location of Safety and Operating Decals (Model 644H shown).

Operating Symbols

Various symbols (shown here, with word descriptions) are used on the tiller and engine (your unit may not have all of the symbols).

STOP

FAST SLOW STOP

R

	CHOKE	CHOKE	REVERSE
			ROTATING
	ON	OFF
			TINES

	TILLER DIRECTION		LEVER DIRECTION

BAILBAIL

ENGAGED DISENGAGED

WARNING

TO AVOID SERIOUS INJURY:

•READ THE OWNER’S MANUAL.

•KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.

•KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.

•NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.

•SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG- GING TINES OR MAKING REPAIRS.

•KEEP BYSTANDERS AWAY FROM MACHINE.

•KEEP AWAY FROM ROTATING PARTS.

•USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.

5

Image 5

Contents Operator’s Manual Finding Model Number Table of ContentsEngine Information Calling Customer SupportTraining SafetyNever operate the tiller under Use a deep depth regulator setting Use slower engine speedsKeep children and pets away Decals Operating SymbolsTools/Materials Needed for Assembly AssemblyLoose Parts List Qty. Description IntroductionMove Tiller Off Shipping Platform Attach HandlebarInstall Reverse Clutch Cable Install Forward Clutch CableCheck Hardware for Tightness Check Level Transmission Gear OilCheck Air Pressure in Tires Tiller is shipped without oil in the engineWheel Drive Pins Features and ControlsReverse Clutch Control Forward Clutch BailTo Operate the Forward Clutch Bail To Operate the Reverse Clutch ControlShallow Settings Deep Handlebar Height AdjustmentTo Adjust the Handlebars Depth Regulator LeverIntroduction OperationInitial Operation Starting and Stopping the EngineOperating the Tiller Use the Fast throttle speed setting when tillingStarting the Engine Stopping the Engine and TillerStopping the Tiller and Engine Turning the Tiller AroundFor reverse motion of the wheels and tines Tilling depths Let the tiller do the workAvoid tilling soggy, wet soil Avoid making footprintsClearing the tines Tilling across slopes without using terracesTilling on slopes Tilling up and down slopesLoading and Unloading the Tiller Required Maintenance Schedule MaintenanceEvery HoursTiller Lubrication Transmission Gear OIL ServiceCheck for OIL Leaks Check HardwareRemoving and Installing Individual Tines Removing and Installing Tine AssembliesTines Tine InspectionTo Check Forward Belt Tension PositionTo Check Reverse Belt Tension Forward Clutch Bail AdjustmentReverse Belt Replacement Information AIR Cleaner Service Engine OIL ServiceSpark Plug Service Engine CleaningTroubleshooting Parts List Models 644H & 645A Models 644H & 645A Models 644H & 645A GW-1224-3 Front 619-04013 RIGHT-HAND Tine 2926 Models 644H & 645A TROY-BILT LLC, P.O. Box 361131, Cleveland, Ohio 44136-0019 TROY-BILT Tiller Lifetime Limited Warranty