Troy-Bilt 654J manual

Page 19

4.Begin the removal the reverse tine belt as follows:

a.Apply pressure on the idler pulleys to relieve tension on the reverse tine cable and the wheel drive cable.

b.Carefully unhook each cable-end.

5.Unloop the wheel drive belt from around the engine pulley.

6.Unloop the reverse tine belt from the engine pulley.

NOTE: Replace the reverse tine belt first and the forward tine belt second. Lastly, reattach the wheel drive belt to the engine pulley or proceed by replacing it.

NOTE: To install replacement belts, perform steps 1-6 in reverse order.

4

a

b

5

6

19

Image 19

Contents Operator’s Manual Finding Model Number Table of ContentsCustomer Support Operation Important Safe Operation PracticesTraining PreparationMaintenance and Storage Adjacent areas Safety Labels Found on Your TillerAssembling the Tiller Tools Needed for AssemblyAttaching the Handle Attaching the Control Box Oil Attaching the Shift CableGas and Oil Fill-up GasolineWheel Engagement Handle Know Your TillerEngine Starter HandleTine Direction Selector Tine Engagement Lever Handle Height AdjusterDepth Regulator Lever Pre-Start Checklist Safety Interlock SystemStarting Engine Operating the Tiller Stopping EngineStopping the Tiller and Engine Tilling Depths Tilling Tips & TechniquesLoading and Unloading the Tiller Tilling Tips & Techniques CON’TLubrication Maintenance and AdjustmentsCleaning the Tiller EngineChecking Hardware AdjustmentsChanging Oil Checking Oil LevelTine Engagement Cables Shift CableWheel Engagement Cable Changing the Belts ServiceTine Drive Belts Page Wheel Drive Belt ViewTires Removing and Installing TinesTines Tine InspectionProblem Possible Cause Correction TroubleshootingWheels and Tines Model 654J Parts ListHandlebar and Controls Spring, Compression, .39x.60 x .88 Lg 46 a 686-04034 Transmission Ring, Retaining, External, 1.188 Dia Shaft Tine Shield Page TROY-BILT Tiller Lifetime Limited Warranty