Poulan FN620L owner manual Maintenance, General Recommendations, Before Each USE, Lubrication

Page 10

MAINTENANCE

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE REGULAR SERVICE

Check Engine Oil Level

 

EACH

USE

HOURS

 

HOURS

 

HOURS

BEFORE

 

5

25

50

EVERY

EVERY

EVERY

 

 

 

 

 

SERVICE DATES

Change Engine Oil

Oil Pivot Points

Inspect Spark Arrester / Muffler

Inspect Air Screen

Clean or Replace Air Cleaner Cartridge

2

 

Clean Engine Cylinder Fins

Replace Spark Plug

1 - Change more often when operating under a heavy load or in high ambient temperatures. 2 - Service more often when operating in dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tiller as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tiller.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the spark plug, clean or replace air filter, and check tines and belts for wear. A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

•Check engine oil level.

•Check tine operation.

•Check for loose fasteners.

LUBRICATION

Keep unit well lubricated (See “LUBRICATION CHART”)

.

LUBRICATION CHART

cTINE CONTROL

dENGINE

cIDLER ARM

cSAE 30 OR 10W-30 MOTOR OIL

dREFER TO MAINTENANCE “ENGINE” SECTION

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model NO. FN620L Training Safety RulesMaintenance and Storage PreparationTable of Contents Tools Required for Assembly AssemblyContents of Hardware Pack Handle Height Unpack Carton & Install Handle See FigInstall Depth Stake Assembly See Fig Tilling WidthOperation Meets Ansi Safety RequirementsKnow Your Tiller Tine Operation See Fig HOW to USE Your TillerStopping See Fig TillingADD Gasoline Before Starting EngineFill Engine with OIL See Fig To Start Engine See FigTilling Hints Breaking in Your TillerCultivating General Recommendations MaintenanceLubrication Chart Before Each USEAIR Cleaner See Fig EngineSpark Plug CleaningMuffler TransmissionTiller Service and AdjustmentsTo Adjust Handle Height See Fig Tine ArrangementFinal Check OFF Position Tine Operation Check See FigTo Remove Belt Guard See Fig Final Check on PositionTo Adjust Carburetor To Replace V-BELT See FigFuel System StorageOther Engine OILTroubleshooting Points Problem Cause CorrectionKEY Part NO. NO. Description Handle AssemblyTiller - Model Number FN620L KEY Part DescriptionBelt Guard and Pulley Assembly 120000369194R Pin, Clevis Wheel and Depth Stake Assembly9186R Wheel Tine Assembly Tineipb473900600 Transmission187912 189783 Decals189784 Limited Warranty
Top Page Image Contents