Poulan 96092000500, 401423 manual Engine, AIR Filter See Fig

Page 13

MAINTENANCE

Disconnect spark plug wire before performing any maintenance (except carburetor adjustment) to prevent accidental starting of engine.

Prevent fires! Keep the engine free of grass, leaves, spilled oil, or fuel. Remove fuel from tank before tipping unit for maintenance. Clean muffler area of all grass, dirt, and debris.

Do not touch hot muffler or cylinder fins as contact may cause burns.

ENGINE

LUBRICATION

Use only high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grade according to your expected temperature.

SAE VISCOSITY GRADES

 

 

 

 

 

 

 

 

SAE 30

 

 

 

 

 

10W-30 / 5W

-30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

F

-20

0

30

40

60

80

100

C

-30

-20

-10

4 10

20

30

40

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

oil_visc_chart5_e(drt)

FIG. 19

NOTE: Although multi-viscosity oils (5W-30, 10W-30, etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 40°F (4°C). Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Add SAE 30 motor oil or equivalent. Tighten oil filler plug securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Figs. 19 and 20)

• Be sure tiller is on level surface.

• Oil will drain more freely when warm.

•

Use a funnel to prevent oil spill on tiller, and catch oil

 

in a suitable container.

•

Remove drain plug.

AIR FILTER (See Fig. 21)

Your engine will not run properly using a dirty air filter. Clean the foam pre-cleaner after every 25 hours of operation or every season. Service paper cartridge every 100 hours of operation or every season, whichever occurs first.

Service air cleaner more often under dusty conditions.

•Remove cover screw and cover.

TO SERVICE PRE-CLEANER

•Remove foam pre-cleaner from air cleaner cover.

•Wash it in liquid detergent and water.

•Squeeze it dry in a clean cloth.

•If very dirty or damaged, replace pre-cleaner.

•Reinstall pre-cleaner into air cleaner cover.

•Reinstall cover and secure screw.

TO SERVICE CARTRIDGE

•Carefully remove cartridge to prevent debris from entering carburetor. Clean base carefully to prevent debris from entering carburetor.

•Clean cartridge by tapping gently on flat surface. If very dirty or damaged, replace cartridge.

•Reinstall cartridge, cover with pre-cleaner and secure with screw.

IMPORTANT: PETROLEUM SOLVENTS, SUCH AS KEROSENE, ARE NOT TO BE USED TO CLEAN THE CARTRIDGE. THEY MAY CAUSE DETERIORATION OF THE CARTRIDGE. DO NOT OIL CARTRIDGE. DO NOT USE PRESSURIZED AIR TO CLEAN OR DRY CARTRIDGE.

COVER

KNOB

COVER

• For easier removal of plug use 7/16 12 Pt. socket with

extension.

• Tip tiller forward to drain oil.

• After oil has drained completely, replace oil drain plug

and tighten securely.

• Remove oil filler plug. Be careful not to allow dirt to

enter the engine.

• Refill engine with oil. See “CHECK ENGINE OIL LEVEL”

AIR CLEANER CARTRIDGE

FOAM PRECLEANER

BASE

in the Operation section of this manual.

OIL

DRAIN

PLUG

OIL FILLER OIL LEVEL

PLUG

FIG. 20

FIG. 21

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Always Wear EYE Protection During Operation DRT65Maintenance and Storage Safety RulesTraining PreparationTable of Contents Tools Required for Assembly AssemblyOPERATOR’S Position See Fig Unpacking Carton See Fig Install Handle See Figs , 4,Connect Shift ROD See Fig Attach Clutch Cable See FigRemove Tiller from Crate Check Tire PressureOperation Meets Ansi Safety RequirementsKnow Your Tiller Tine Operation with Wheel Drive HOW to USE Your TillerForward Wheels ONLY/TINES Stopped Reverse Wheels ONLY/TINES StoppedCultivating TurningTo Transport Before Starting EngineTo Start Engine See Fig ADD GasolineTilling Hints See Fig Adjust Wheels for Cultivating See Figs Maintenance Schedule MaintenanceLubrication Chart General RecommendationsAIR Filter See Fig EngineCooling System See Fig CleaningMuffler Spark PlugTiller Service and AdjustmentsTire Care To Replace Ground Drive Belt See Figs Ground Drive Belt Adjustment See FigTine Replacement See Figs , 28 To Adjust Carburetor To Adjust Throttle Control Cable See FigOther StorageFuel System Engine OILTroubleshooting Points Limited Warranty Parts and Service

96092000500, 401423 specifications

The Poulan 401423, also known by its part number 96092000500, is a versatile and reliable outdoor power equipment designed to meet the needs of homeowners and gardening enthusiasts alike. This model is particularly well-regarded for its rugged construction, powerful performance, and user-friendly features, making it an ideal choice for various lawn care tasks.

One of the standout characteristics of the Poulan 401423 is its robust engine. It features a potent 40cc 2-cycle engine, providing ample power for cutting through thick grass, weeds, and brush. This engine design not only delivers impressive torque but also ensures a lightweight feel, allowing users to maneuver the equipment with ease. The engine is paired with a high-efficiency air filter that enhances performance and extends the equipment's lifespan by minimizing dust and debris intake.

In addition to its powerful engine, the Poulan 401423 features an adjustable cutting head that allows users to customize their cutting height based on the type of terrain and the desired lawn appearance. This feature is particularly beneficial for maintaining a pristine lawn, as it enables precise control over the grass length. The cutting head is also designed with a dual-line system that provides efficient trimming, helping to achieve a clean edge along sidewalks and flower beds.

Ergonomics is another key focus in the design of the Poulan 401423. The equipment is equipped with a comfortable, padded handle that reduces user fatigue, making it ideal for extended use. Additionally, it has a lightweight structure, which minimizes strain on the arms and back while working on landscaping projects.

Technology-wise, the Poulan 401423 incorporates anti-vibration technology, which significantly reduces vibrations felt by the user. This not only enhances comfort but also improves accuracy during operation, ensuring a more enjoyable lawn care experience.

Furthermore, the model features an easy-start mechanism, which allows for quick ignition with minimal effort. This is particularly useful for users who may struggle with traditional starting methods, ensuring that the equipment is ready to go when you are.

Overall, the Poulan 401423,96092000500 stands out as a powerful and efficient tool for outdoor maintenance. With its robust engine, adjustable cutting capabilities, ergonomic design, and innovative technology, it embodies the qualities that make it a top choice for anyone serious about lawn care. Whether tackling overgrown areas or fine-tuning the edges of your garden, this model successfully delivers on performance and user satisfaction.
Top Page Image Contents