MTD 12212, 12211 owner manual Bumper, Hiller/Furrower, ROW Marker

Page 31

Section 5: Maintenance

WARNING Before inspecting, cleaning or servicing the unit, shut off engine, wait for all parts to come to a complete stop, disconnect spark plug wire and move wire away from spark plug. Remove ignition key on elec- tric start models. Failure to follow these instructions can result in serious personal injury or property damage.

TILLER ATTACHMENTS

The attachments listed below are available for your tiller. The information is the most current at the time this manual was printed. Contact your authorized dealer or the factory for current information.

BUMPER

The tubular steel bumper helps to protect the engine from damage.

HILLER/FURROWER

The furrower blade attaches to the back of the depth regulator assembly and is used to create rows, trenches and ditches up to 8" deep, depending on soil conditions. The two hiller wings attach to the sides of the furrower blade and are used to make hilled rows and raised bed gardens.

ROW MARKER

The row marker attaches to the hiller/furrower attachment and is used to scratch lines in the seedbed for laying out furrows, trenches, raised beds, etc. (eliminates the need for stakes, string and measuring tape). The row marker is adjustable in length from 28" to 49-3/4", allowing you to vary the width of the marked rows as required.

31

Image 31

Contents Recoil Start Model shown 7HP Pony REAR-TINE TillerSee Back Cover for Customer Service information Operation Repairs, adjustments or inspectionsTraining PreparationKeep children and pets away Maintenance and StorageUse slower engine speeds Decals Operating SymbolsTo Avoid Serious Injury Attach Handlebars Hardware BAG Parts ListIntroduction Inspect UnitAttach Forward Clutch Control Cable Attach Reverse Clutch Control CableCheck Transmission Gear OIL Level ADD Motor OIL to EngineCheck AIR Pressure in Tires Attach Wheel Gear LeverCheck Hardware for Tightness Battery Activation and Charging Electric Start Assembly StepsInstall Battery Attach Battery Cables and Vent TubeKeyswitch Connect Wiring HarnessTo Operate the Forward Clutch Control Engine ControlsForward Clutch Control Wheel Gear LeverDepth Regulator Handlebar Height AdjustmentTo Adjust the Handlebar Height Reverse Clutch ControlStop Stops the engine on recoil start models only Electric Start Keyswitch Electric Start ModelEngine Controls Engine Throttle Control LeverBREAK-IN Operation PRE-START ChecklistStarting and Stopping EngineRelease all controls on the tiller Operating the TillerStarting the Engine Stopping the EngineStopping the Tiller and Engine Turning the Tiller AroundFor forward motion of the wheels and tines For reverse motion of the wheels and tinesAvoid making footprints Let the tiller do the workTilling depths Avoid tilling soggy, wet soilTilling up and down slopes Tilling across slopes without using terracesClearing the tines Tilling on slopesLoading and Unloading the Tiller Power CompostingEvery Required Maintenance ScheduleProcedure Tiller LubricationCheck for OIL Leaks Transmission Gear OIL ServiceCheck Hardware Check Tire PressureCARBURETOR/GOVERNOR Control Adjustments Engine CleaningEngine OIL Service AIR Cleaner ServiceOFF Season Storage Wheel Gear Cable AdjustmentBolo Tines Checking and Adjusting Tension on Clutch Belts Checking and Adjusting Forward Clutch Belt TensionCutting Edge Tine More Belt Tension Checking and Adjusting Reverse Clutch Belt TensionRemoving Forward Clutch Belt Installing Forward Clutch BeltRemoving Reverse Clutch Belt Installing Reverse Clutch BeltBattery Removal and Installation Battery MaintenanceBattery Care in Service Battery StorageHILLER/FURROWER BumperROW Marker Problem Possible Cause Correction TroubleshootingPart Description Models 12211QTY See page 36, Ref 47, for attach Ment screw Parts List ENGINE, Support BRACKETS, PULLEYS, BELTS, Belt Cover 1917326 Part Description QTY Main Drive Shaft Input Pinion Shaft & Gear AssemblyWheel SHAFT, Eccentric Shaft and Tiller Shaft Assemblies Thicker than standard tines Bolo TINES, WheelsElectric Start Assembly 1918831001 Battery Bracket Bumper Attachment ROW Marker Attachment2322 Description QTY ROW Marker Attachment & Bumper AttachmentRow Marker Attachment option BumperHILLER/FURROWER Attachment Page Owner Registration Card Warranty ServiceReplacement Parts Engine Service and Repair