King Kutter TG-48-XB manual Transport Safety

Page 15

OPERATIONAL SAFETY continued...

Pass rotary tiller diagonally through sharp dips and avoid sharp drops to prevent

“hanging up” tractor and rotary tiller. Practice will improve your skills in maneu- vering on rough terrain. Always cut down slopes, never across the face. Always check tractor manual for proper use on slopes.

When using a unit, a minimum 20% of tractor and equipment weight must be on tractor front wheels. Without this weight, tractor could tip over, causing personal injury or death. The weight may be attained with a front- end loader, front wheel weights, ballast in the tires or front tractor weights. When attaining a minimum 20% of tractor and equipment weight on the front wheels, you must not exceed the ROPS weight certification. Weigh the tractor and equipment. Do not guess or estimate!

TRANSPORT SAFETY

Comply with state and local laws governing highway safety and movement of farm machinery on public roads.

The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. Local laws should be checked for all lighting and marking requirements.

At all times, when driving the tractor and equipment on the road or highway un- der 20mph (32kph) use flashing amber warning lights and a slow moving vehicle (SMV) identification emblem. Do not exceed 20 mph (32 kph). Reduce speed on rough roads and surfaces.

Plan your route to avoid heavy traffic.

Always install transport locks, pins or brackets before transporting.

Do not drink and drive.

Be a safe and courteous driver. Always yield to oncoming traffic in all situations, including narrow bridges, intersections, etc. Watch for traffic when operating near or crossing roadways.

Turn curves or go up or down hills only at a low speed and at a gradual steering angle. Make certain that a least 20% of the tractor’s weight is on the front wheels to maintain safe steerage. Slow down on rough or uneven surface. Al- ways check tractor manual for proper use on slopes.

Use extreme care and maintain minimum ground and when operating close to ditches or fences. Be careful when turning sharp corners.

Never allow riders on either tractor or tiller.

15

Image 15
Contents Rotary Tiller Page To the Purchaser Page Contents Safety Equipment Safety Guidelines Before Putting Rotary Tiller Into Service XB-ROTARY Tiller Assembly InstructionsFigure a Figure D Safety Training Prepartion Starting and Stopping SafetyOperational Safety Operational Safety Transport Safety Step Attaching to TractorAttaching to Tractor Sizing PTO Shaft Step Operating Instructions Step Maintenance Storage Safety Maintenance SafetyTop View Page Page Page Page 22 PTO XB Tiller Exploded View TG-48-XB Tiller Parts List TG-48-XB Side Gearbox Parts TG-48-XB Side Gearbox Parts List TG-48-XB Series TOP Gearbox Parts TG-48-XB Series TOP Gearbox Parts List TG-48-XB HUB Parts Part Name Part Number Limited Warranty