Husqvarna TS200FR owner manual Storage, Other, Fuel System, Engine OIL, Cylinders

Page 12

STORAGE

Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more.

CAUTION: Never store the tiller with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TILLER

•Clean entire tiller (See “CLEANING” in the Customer Responsibilities section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Customer Responsibilities section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS THE CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean oil. (See “ENGINE” in the Customer Responsibilities section of this manual).

CYLINDERS

•Remove spark plug.

•Pour 1 ounce (29 ml) of oil through spark plug hole into cylinder.

•Pull starter handle slowly several times to distribute oil.

•Replace with new spark plug.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to give protection from dust and dirt.

•Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVERTILLERWHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Sleeve Hitch Tiller Attachment Model Number TS200FR Maintenance and Storage TrainingPreparation OperationTable of Contents Assembly Attaching Tiller to TractorHOW to USE Your Tiller OperationBefore Starting the Engine ADD GasolineTo Start Tiller Engine See Fig TillingCultivating Operation DO’S and DON’TSCustomer Responsibilities General RecommendationsTiller Before Each USEAIR Filter Foam PRE-CLEANER See Fig EngineLubrication Cleaning Cooling System See FigMuffler Spark PlugService and Adjustments To Adjust Gauge WheelsTo Adjust Belt See Fig To Replace Belt See FigTo Adjust Carburetor See Fig Preliminary SettingFinal Setting Idle RPM AdjustmentStorage OtherFuel System Engine OILTroubleshooting Points HP Tiller Attachment - Model Number TS200FR Engine and TinesKEY Part Description Transmission and Gauge Wheels Repair Parts 02480

TS200FR specifications

The Husqvarna TS200FR is a high-performance, versatile machine designed for professional use in demanding environments. Known for its robustness and reliability, the TS200FR is a powerful tool that excels in various applications, including landscaping, grounds maintenance, and outdoor construction tasks. This track-driven, stand-on model provides exceptional stability and maneuverability, making it an ideal choice for operators seeking efficiency and comfort.

One of the standout features of the Husqvarna TS200FR is its powerful engine, which delivers impressive performance and torque. This engine enables the machine to tackle tough terrains and challenging tasks with ease. The reliable powertrain is designed to ensure consistent performance, allowing operators to maintain high productivity levels throughout their workday.

The TS200FR is equipped with advanced technologies that enhance its overall functionality. The patented All-Wheel-Drive system ensures optimal power distribution to all four wheels, providing superior traction on slippery or uneven surfaces. This feature is particularly beneficial when navigating steep inclines or wet conditions, minimizing the risk of slippage or loss of control.

Another key characteristic of the TS200FR is its user-friendly design. The intuitive controls are designed for ease of use, allowing operators to focus on their tasks without unnecessary distractions. The adjustable operator platform provides comfort during prolonged use, enabling users to operate the machine effectively without fatigue.

The machine also boasts a compact footprint, making it easy to maneuver in tight spaces. This is particularly advantageous for landscaping projects or urban environments where space can be limited. The durable construction of the TS200FR ensures that it can withstand the rigors of daily use, providing peace of mind for operators and businesses alike.

Maintenance is straightforward, thanks to the easily accessible components and clear service points. This design consideration minimizes downtime and enhances overall efficiency, allowing users to spend more time on the job rather than in the maintenance shop.

In summary, the Husqvarna TS200FR stands out as a powerful, reliable, and user-friendly machine suitable for a variety of demanding applications. Its robust engine, advanced traction technologies, and compact design make it an essential tool for professionals in landscaping and outdoor construction, ensuring high levels of productivity and operator satisfaction.
Top Page Image Contents