Husqvarna TS200FR owner manual Assembly, Attaching Tiller to Tractor

Page 4

ASSEMBLY

When R.H., (Right Hand) or L.H. (Left Hand) are used, it means from a position behind the steering wheel as If you were seated on the tractor seat and facing forward.

NOTE: Remove mower deck from tractor before mounting tiller attachment.

•Remove tiller and bag of parts from carton.

Place tiller on level ground so that tractor can be backed up to it for assembly.

CAUTION: Tiller will be heavy when performing the following step.

Adjust tiller gauge wheels so that engine is level (Fig. 1).

•Remove retainer spring from drilled rivet.

•Remove rivet and adjust gauge wheels up or down as required to level tiller. Replace rivet and retainer spring.

ATTACHING TILLER TO TRACTOR

Optional accessory tractor weights and/or tire chains should be purchased to aid in the operation of this tiller attachment.

•Install one or more wheel weights to each rear wheel to insure good traction when operating.Tire chains can be used in place of, or in addition to, wheel weights.

•Adjust stabilizer bolts so that ends are about flush with rear of hitch bail (Fig. 2 - Inset). Leave nuts loose.

•Lower hitch assembly and slide hitch yoke of tiller (Fig. 2 - Inset) over hitch tube of sleeve hitch so that the hitch pin holes line up.

•Insert hitch pin until it extends from bottom of hitch yoke (Fig. 2 - Inset). Insert retainer spring into hitch pin.

•Tighten both stabilizer bolts against the hitch yoke until there is no looseness at the hitch point. (The frame assembly does not swing sideways relative to the hitch bail (Fig. 2). Be sure the frame assembly is perpendicular (square) to the centerline (direction of travel) of the tractor. This can be determined by mea- suring the distance between the edge of tine shield (Fig. 2) and the back of the rear tires. This distance should be the same on the R.H. and L.H. sides within 1/2 inch. Securely tighten the nuts on the stabilizer bolts.

NOTE: The stabilizer bolts should be loosened before removing the tiller from the tractor. This will make it easier to remove the hitch pin and to line up hitch pin holes when installing another attachment.If tractor is to be used without a rear attachment, the stabilizer bolt should be secured by tightening the nuts (Fig. 2-Inset).

FIG. 1

•Install two front end weights to the front of the tractor. This will aid steering control.

•

Check tractor tires for proper air pressure. See your

FIG. 2

 

tractor's Owner's Manual.

 

•

Assemble sleeve hitch to tractor. See hitch Owner's

4

 

Manual.

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Sleeve Hitch Tiller Attachment Model Number TS200FR Maintenance and Storage TrainingPreparation OperationTable of Contents Assembly Attaching Tiller to TractorHOW to USE Your Tiller OperationBefore Starting the Engine ADD GasolineTo Start Tiller Engine See Fig TillingCultivating Operation DO’S and DON’TSCustomer Responsibilities General RecommendationsTiller Before Each USEEngine AIR Filter Foam PRE-CLEANER See FigLubrication Cleaning Cooling System See FigMuffler Spark PlugService and Adjustments To Adjust Gauge WheelsTo Adjust Belt See Fig To Replace Belt See FigTo Adjust Carburetor See Fig Preliminary SettingFinal Setting Idle RPM AdjustmentStorage OtherFuel System Engine OILTroubleshooting Points HP Tiller Attachment - Model Number TS200FR Engine and TinesKEY Part Description Transmission and Gauge Wheels Repair Parts 02480

TS200FR specifications

The Husqvarna TS200FR is a high-performance, versatile machine designed for professional use in demanding environments. Known for its robustness and reliability, the TS200FR is a powerful tool that excels in various applications, including landscaping, grounds maintenance, and outdoor construction tasks. This track-driven, stand-on model provides exceptional stability and maneuverability, making it an ideal choice for operators seeking efficiency and comfort.

One of the standout features of the Husqvarna TS200FR is its powerful engine, which delivers impressive performance and torque. This engine enables the machine to tackle tough terrains and challenging tasks with ease. The reliable powertrain is designed to ensure consistent performance, allowing operators to maintain high productivity levels throughout their workday.

The TS200FR is equipped with advanced technologies that enhance its overall functionality. The patented All-Wheel-Drive system ensures optimal power distribution to all four wheels, providing superior traction on slippery or uneven surfaces. This feature is particularly beneficial when navigating steep inclines or wet conditions, minimizing the risk of slippage or loss of control.

Another key characteristic of the TS200FR is its user-friendly design. The intuitive controls are designed for ease of use, allowing operators to focus on their tasks without unnecessary distractions. The adjustable operator platform provides comfort during prolonged use, enabling users to operate the machine effectively without fatigue.

The machine also boasts a compact footprint, making it easy to maneuver in tight spaces. This is particularly advantageous for landscaping projects or urban environments where space can be limited. The durable construction of the TS200FR ensures that it can withstand the rigors of daily use, providing peace of mind for operators and businesses alike.

Maintenance is straightforward, thanks to the easily accessible components and clear service points. This design consideration minimizes downtime and enhances overall efficiency, allowing users to spend more time on the job rather than in the maintenance shop.

In summary, the Husqvarna TS200FR stands out as a powerful, reliable, and user-friendly machine suitable for a variety of demanding applications. Its robust engine, advanced traction technologies, and compact design make it an essential tool for professionals in landscaping and outdoor construction, ensuring high levels of productivity and operator satisfaction.
Top Page Image Contents