Husqvarna TS200FR Operation, HOW to USE Your Tiller, Before Starting the Engine, ADD Gasoline

Page 5

OPERATION

IMPORTANT: READ THE “RULES FOR SAFE OPERATION” CAREFULLY BEFORE OPERATING YOUR TILLER ATTACHMENT.

CHECK ENGINE OIL LEVEL (See Fig. 1)

The engine on your tiller has been shipped from the fac- tory, already filled with summer weight oil.

HOW TO USE YOUR TILLER

•Check engine oil with engine leveled on level ground.

STOPPING (See Fig. 3)

TINES

•Move tine clutch lever to “DISENGAGED” position.

ENGINE

•Move engine throttle lever to “STOP” position.

•Never use choke to stop engine.

TO USE CHOKE CONTROL (See Fig. 3-Inset)

Use choke control whenever you are starting a cold engine. Do not use choke to start a warm engine.

•To engage choke, slowly move lever to desired po- sition.

TO ADJUST TILLING DEPTH (See Figs. 4 & 5)

The tilling depth is controlled by the gauge wheels and to some extent by the adjustable link sleeve. When deeper tilling is required, the gauge wheels must be raised.Wheels must be lowered for shallower tilling,

•Remove retainer spring from drilled rivet.Adjust gauge wheels up or down as desired and replace rivet and retainer spring.

NOTE: Each hole will raise or lower gauge wheels 1 inch.

•Tiller can be leveled from front to rear by turning ad- justable link sleeve. The adjustable link sleeve also controls tilling depth. Shortening the adjustable link sleeve and lift links will decrease tilling depth and lengthening will increase tilling depth.

TO OPERATE TILLER (See Fig. 3)

•Select desired tilling depth.

•Raise tiller with tractor lift control and disengage tiller clutch control.

•Start tiller engine.See “BEFORE STARTING ENGINE” in this section of manual.

•Move tine clutch lever to “ENGAGED” position. Dis- engage and engage several times to check the clutch- ing action of the belt.

•Slowly lower tiller with tractor lift control and begin tractor forward movement.

•Never operate tractor in reverse when tiller is in the ground.

•To stop tiller and engine, disengage tine clutch lever and move throttle lever to “STOP” position.

•Remove dipstick and wipe clean, replace, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reach. Do not overfill.

•For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

•To change engine oil, see the Customer Responsi- bilities section in this manual.

ADD GASOLINE

•Fill fuel tank. Use fresh, clean, regular unleaded gas- oline. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life).

IMPORTANT:WHENOPERATINGINTEMPERATURESBELOW 32°F (0°C), USE FRESH CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

BEFORE STARTING THE ENGINE

CHECK TRANSMISSION OIL LEVEL (See Fig. 1)

•The transmission has been filled at the factory.

•Check transmission oil with the tiller leveled on level ground.

•Remove oil fill plug. Oil should be level with the bottom

of tiller plug hole. If necessary add oil until it is level

5

FIG. 3

with hole.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sleeve Hitch Tiller Attachment Model Number TS200FR Training Maintenance and StoragePreparation OperationTable of Contents Attaching Tiller to Tractor AssemblyOperation HOW to USE Your TillerBefore Starting the Engine ADD GasolineTilling To Start Tiller Engine See FigCultivating Operation DO’S and DON’TSGeneral Recommendations Customer ResponsibilitiesTiller Before Each USELubrication AIR Filter Foam PRE-CLEANER See FigEngine Cooling System See Fig CleaningMuffler Spark PlugTo Adjust Gauge Wheels Service and AdjustmentsTo Adjust Belt See Fig To Replace Belt See FigPreliminary Setting To Adjust Carburetor See FigFinal Setting Idle RPM AdjustmentOther StorageFuel System Engine OILTroubleshooting Points Engine and Tines HP Tiller Attachment - Model Number TS200FRKEY Part Description Transmission and Gauge Wheels Repair Parts 02480

TS200FR specifications

The Husqvarna TS200FR is a high-performance, versatile machine designed for professional use in demanding environments. Known for its robustness and reliability, the TS200FR is a powerful tool that excels in various applications, including landscaping, grounds maintenance, and outdoor construction tasks. This track-driven, stand-on model provides exceptional stability and maneuverability, making it an ideal choice for operators seeking efficiency and comfort.

One of the standout features of the Husqvarna TS200FR is its powerful engine, which delivers impressive performance and torque. This engine enables the machine to tackle tough terrains and challenging tasks with ease. The reliable powertrain is designed to ensure consistent performance, allowing operators to maintain high productivity levels throughout their workday.

The TS200FR is equipped with advanced technologies that enhance its overall functionality. The patented All-Wheel-Drive system ensures optimal power distribution to all four wheels, providing superior traction on slippery or uneven surfaces. This feature is particularly beneficial when navigating steep inclines or wet conditions, minimizing the risk of slippage or loss of control.

Another key characteristic of the TS200FR is its user-friendly design. The intuitive controls are designed for ease of use, allowing operators to focus on their tasks without unnecessary distractions. The adjustable operator platform provides comfort during prolonged use, enabling users to operate the machine effectively without fatigue.

The machine also boasts a compact footprint, making it easy to maneuver in tight spaces. This is particularly advantageous for landscaping projects or urban environments where space can be limited. The durable construction of the TS200FR ensures that it can withstand the rigors of daily use, providing peace of mind for operators and businesses alike.

Maintenance is straightforward, thanks to the easily accessible components and clear service points. This design consideration minimizes downtime and enhances overall efficiency, allowing users to spend more time on the job rather than in the maintenance shop.

In summary, the Husqvarna TS200FR stands out as a powerful, reliable, and user-friendly machine suitable for a variety of demanding applications. Its robust engine, advanced traction technologies, and compact design make it an essential tool for professionals in landscaping and outdoor construction, ensuring high levels of productivity and operator satisfaction.
Top Page Image Contents