Buhler FK366 warranty Maintenance Safety, Transport Safety, Storage Safety, Safety Signs

Page 6

45 Series Rotary Tiller

MAINTENANCE SAFETY

1.Follow ALL the operating, maintenance and safety information in the manual.

2.Support the machine with blocks or safety stands when working beneath it.

3.Follow good shop practices

-Keep service area clean and dry.

-Be sure electrical outlets and tools are properly grounded.

-Use adequate light for the job at hand.

4.Use only tools, jacks and hoists of sufficient capacity for the job.

5.Never work on rotor blades or under the machine unless the tractor engine is off and driveline is disconnected.

6.Make sure all guards are in place and properly secured when maintenance work is completed.

7.Never wear ill-fitting, baggy or frayed clothing when working around or on any of the drive system components.

8.Keep hands, feet, hair and clothing away from moving or rotating parts.

9.Clear the area of bystanders, especially small children, when carrying out any maintenance and repairs or making any adjustments.

TRANSPORT SAFETY

1.Review Transport Safety instructions in tractor manual before moving.

2.Always travel at a safe speed.

3.Always use hazard warning flashers on tractor when transporting unless prohibited by law.

4.Do not exceed 20 mph (32 kph) during transport.

STORAGE SAFETY

1.Store the unit in an area away from human activity.

2.Do not permit children to play on or around the stored machine.

3.Support frame on stands and blocks to provide a secure base.

SAFETY SIGNS

1.Keep safety signs clean and legible at all times.

2.Replace safety signs that are missing or have become illegible.

3.Replaced parts that displayed a safety sign should also display the current sign.

4.Safety signs are available from your Dealer Parts Department or the factory.

5

Image 6
Contents Table of Contents Description Warranty Claims Warranty LaborImportant Facts Introduction Safety Think SAFETY! Work SafelyGeneral Safety Operating SafetyStorage Safety Maintenance SafetyTransport Safety Safety SignsHow to Install Safety signs Safety Sign LocationsWork Safely Safety Sign Locations cont’d Operation To the NEW Operator or Owner Machine ComponentsPRE-OPERATION Checklist Machine BREAK-INPoint Hitch Horsepower vs. WidthEquipment Matching Load Sensing HydraulicsDriveline Dimension Driveline Dimension Contd ATTACHING/UNHOOKING Field Operation Field Operation contd Field Operation contd Speed vs. weight Ratio TransportingStorage Service and Maintenance Fluids and LubricantsGreasing Servicing Intervals Hours or once a seasonServicing Intervals cont’d Hours AnnuallyMaintenance Frame AdjustmentTine Replacement Clutch Maintenance Slip ClutchTrouble Shooting Problem Cause SolutionAssembly English Torque Specifications Bolt TorqueSeries Tiller Series Rotary Tiller Parts List When Ordering Parts Item # DescriptionAdjustment Mount Bracket Page Series Tiller Gearbox #906913 Series Rotary Tiller Series Tiller PTO Parts List Shipping Bundles Quantity Bundle Required NumberTiller c/w PTO