Section Maintenance, Operation, Transporting

3-3 OPERATION

A. Perform BEFORE EACH USE maintenance listed in paragraph 4-1.

B. Adjust for work per paragraph 3-2.

C. Start tractor. Raise tiller off the ground.

D. With tractor at idle speed, engage PTO drive.

DANGER

STAY CLEAR OF ROTATING DRIVELINES. DO NOT OPERATE WITHOUT DRIVELINE SHIELDS IN PLACE AND IN GOOD CONDI- TION. FAILURE TO HEED THESE WARN- INGS MAY RESULT IN PERSONAL INJURY OR DEATH.

DANGER

KEEP HANDS AND FEET FROM UNDER MACHINE AT ALL TIMES. MAKE CERTAIN EVERYONE IS CLEAR OF MACHINE BEFORE OPERATING. FAILURE TO HEED THESE WARNINGS MAY RESULT IN PER- SONAL INJURY OR DEATH.

E. Place tractor in gear and proceed forward. Increase speed to 3/4 throttle. Lower tiller into soil. Increase speed to 540 PTO rpm. Average soil with reasonable moisture will allow travel speeds up to 2 mph. Hard soil will require low travel speed, less than 1 mph to ensure smooth operation and maxi- mum possible depth. Shallow weed cultivation will allow speeds up to 3 mph. At the end of a pass lift tiller clear of ground before making a turn. After turning, proceed back across field, slowly lowering the tiller into the soil. Do not turn with tiller in the ground as this can damage tiller and tractor link- age. Never use reverse gear while tiller is low- ered into ground. Avoid operating tiller in the raised position.

3-4 TRANSPORTING

Do not engage PTO drive while transporting tiller. Obey all state and local laws when transporting on public roads. Always use flashing warning lights unless prohibited by law.

SECTION IV

MAINTENANCE

4-1 MAINTENANCE CHECK LIST

Perform scheduled maintenance as outlined below. Lower machine to ground, turn off tractor and set parking brake before doing maintenance inspections or work. Some checks may require raising machine off ground and supporting with blocks. All bolts should be torqued as recommended in TORQUE SPECIFICATIONS, unless otherwise indicated.

BEFORE EACH USE

1.Check tractor tire air pressure. Refer to tractor operator’s manual.

WARNING

THE TILLER CAN FALL FROM HYDRAULIC SYSTEM FAILURE. TO AVOID SERIOUS INJURY OR DEATH, SECURELY SUPPORT TILLER BEFORE WORKING UNDER- NEATH.

2.Check blades and rotor to be sure that no foreign objects such as wire or steel strapping bands are wrapped around them.

3.Check blade bolts for tightness. Tighten to 73 ft./lbs.

4.Inspect blades for wear. Replace if necessary.

5.Make certain driveline shields are in place and in good repair.

6.Clean any debris from safety decals and check for legibility. Replace any missing or illegible decals. Read and heed safety messages.

7.Perform BEFORE EACH USE lubrication per paragraph 4-2.

8.During operation, listen for abnormal sounds which might indicate loose parts, damaged bear- ings, or other damage.

WARNING

THE TILLER CAN FALL FROM HYDRAULIC SYSTEM FAILURE. TO AVOID SERIOUS INJURY OR DEATH, SECURELY SUPPORT TILLER BEFORE WORKING UNDER- NEATH.

AFTER EACH USE

1.Clean all debris from machine especially underside of deck and affixed decals. Replace any missing or illegible decals.

2.Inspect tiller for worn or damaged components. Repair or replace before next use. Any replace- ment components installed during repair shall include the components current safety decals specified by the manufacturer to be affixed to the component.

3.Store in dry place.

RTS specifications

The Bush Hog RTS series is a standout line of rotary tillers designed for both performance and durability, making it an ideal choice for agricultural, landscaping, and gardening applications. Built to meet the demanding needs of professional landscapers and dedicated gardeners, the RTS offers several key features and advanced technologies.

One of the most noteworthy aspects of the Bush Hog RTS is its robust construction, which leads to enhanced longevity and reliability. The frame is heavily reinforced to withstand tough operating conditions, while the tiller tines are crafted from high-quality materials, ensuring they maintain their sharpness and effectiveness even after extensive use. This durability translates to lower maintenance costs and reduced downtime, crucial for maintaining productivity.

In terms of performance, the RTS series stands out with its impressive tilling depth and width capabilities. Users can achieve a maximum tilling depth that allows for effective soil aeration, promoting root growth and improving overall soil health. The width options available in the RTS lineup provide flexibility, catering to various field sizes and types of landscaping projects.

The Bush Hog RTS also incorporates advanced technology to enhance ease of use. The adjustable side runners enable users to control the tilling depth precisely, while built-in gearbox systems allow for smooth power transfer, ensuring consistent performance while reducing wear and tear on the machine.

Another significant feature is the chain-driven design that promotes efficient power usage and minimizes slippage. This results in a more reliable operation, especially in challenging soil conditions. Furthermore, the RTS series is compatible with a variety of tractor models, making it a versatile addition to any equipment fleet.

To maximize operator comfort and efficiency, the RTS features an ergonomic design, enabling easy attachment and detachment to tractors. The simple controls and straightforward operation make it accessible for users of all skill levels, reducing the learning curve for new operators.

Overall, the Bush Hog RTS rotary tillers combine strength, versatility, and innovative features, positioning them as a top choice for those looking to enhance their land management and agricultural productivity. With their superior construction and performance, the RTS series stands ready to tackle soil preparation tasks of any scale with ease and effectiveness.