Bush Hog RTS manual Offsetting Tiller, Hitch Lug Dimension Clamp Bolts Frame Gearbox

Page 9

H. Using cut off section of shield as a guide, cut shaft the same amount. (Figure 2-4)

Figure 2-4

2-2 OFFSETTING TILLER

The tillers may be offset to the right up to 6 inches on Model RTS40, 12 inches on Models RTS50 and RTS60, and 18-1/4 inches on Model RTS74. Adjust as follows:

A. Loosen U-bolts securing hitch lugs and gearbox stand to tiller frame.

B. Slide hitch lugs and gearbox to desired position maintaining the distance shown in Figure 2-6. An addi- tional 4-1/2 inches of offset can be obtained on the RTS40 and RTS50 by reversing hitch lugs as shown in Figure 2-7.

C. Tighten U-bolts.

I. Repeat steps “G” and “H” to other driveline section.

J. Deburr ends of driveline sections and clean away all chips and fillings. (Figure 2-5)

Figure 2-5

Figure 2-6 Hitch Lug Dimension

Clamp

 

 

Bolts

 

 

Frame

Gearbox

Hitch Pin

 

Input Shaft

Brackets

 

26-7/8”

 

 

K. Apply multi-purpose grease to inside of outer (female) driveline section. Assemble driveline and install on tractor and tiller. Pull on each driveline section to be sure yokes lock into place. Make cer- tain driveline shielding is in place and in good condi-

tion.

L. Adjust lower lift arm to level tiller right to left. Refer to tractor operator’s manual for instructions.

M. Adjust top link of tractor 3-point hitch to level tiller front to rear.

N. Set up tractor stabilizer bars, sway blocks, or equivalent to prevent implement side sway.

Figure 2-7 Alternate Hitch Lug Mounting

26-7/8”

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Bush HOG Congratulations Retail CUSTOMER’S Responsibility Under the Bush HOG Warranty Table of ContentsDisclaimer of Implied Warranties & Consequential Damages This Limited Warranty Shall not ApplyRotary Tillers Dealer Preparation Check ListImportant Safety Precautions Section Introduction and Description Technical SpecificationsIntroduction DescriptionAttaching to Tractor Section Preparation for USEHitch Lug Dimension Clamp Bolts Frame Gearbox Offsetting TillerGeneral Safety Adjusting for WorkSection Operating Instructions Maintenance Check List Section MaintenanceOperation TransportingBinacchi Driveline Bondioli & Pavesi DrivelineBolt Replacement Blade ReplacementSlip Clutch Adjustment Slip Clutch Operational CheckSection Dealer Assembly TroubleshootingTroubleshooting Exploded Assembly Safety Decals Recommended Torque in Foot Pounds Newton Meters Torque SpecificationsEmployee Tractor Operating Instructions EMPLOYERS, Employees and OperationsThis Act Seeks Osha Regulations

RTS specifications

The Bush Hog RTS series is a standout line of rotary tillers designed for both performance and durability, making it an ideal choice for agricultural, landscaping, and gardening applications. Built to meet the demanding needs of professional landscapers and dedicated gardeners, the RTS offers several key features and advanced technologies.

One of the most noteworthy aspects of the Bush Hog RTS is its robust construction, which leads to enhanced longevity and reliability. The frame is heavily reinforced to withstand tough operating conditions, while the tiller tines are crafted from high-quality materials, ensuring they maintain their sharpness and effectiveness even after extensive use. This durability translates to lower maintenance costs and reduced downtime, crucial for maintaining productivity.

In terms of performance, the RTS series stands out with its impressive tilling depth and width capabilities. Users can achieve a maximum tilling depth that allows for effective soil aeration, promoting root growth and improving overall soil health. The width options available in the RTS lineup provide flexibility, catering to various field sizes and types of landscaping projects.

The Bush Hog RTS also incorporates advanced technology to enhance ease of use. The adjustable side runners enable users to control the tilling depth precisely, while built-in gearbox systems allow for smooth power transfer, ensuring consistent performance while reducing wear and tear on the machine.

Another significant feature is the chain-driven design that promotes efficient power usage and minimizes slippage. This results in a more reliable operation, especially in challenging soil conditions. Furthermore, the RTS series is compatible with a variety of tractor models, making it a versatile addition to any equipment fleet.

To maximize operator comfort and efficiency, the RTS features an ergonomic design, enabling easy attachment and detachment to tractors. The simple controls and straightforward operation make it accessible for users of all skill levels, reducing the learning curve for new operators.

Overall, the Bush Hog RTS rotary tillers combine strength, versatility, and innovative features, positioning them as a top choice for those looking to enhance their land management and agricultural productivity. With their superior construction and performance, the RTS series stands ready to tackle soil preparation tasks of any scale with ease and effectiveness.
Top Page Image Contents