Bush Hog RTS manual Bondioli & Pavesi Driveline, Binacchi Driveline

Page 12

4-2 LUBRICATION (Figure 4-1)

NOTE

The multi-purpose grease referenced in this section is an NLGI Grade 2 type grease.

BEFORE EACH USE

1.Driveline Universal Joints - Apply multi-purpose grease with grease gun.

2.Driveline Guard - Apply 2-3 shots of multi-purpose grease with grease gun to plastic fitting.

3.Driveline - Disconnect PTO driveline, pull the two sections apart, apply thin coat of multi-purpose grease to the outside of inner (male) section.Reassemble sections and install. Pull each section to be sure driveline and shields are securely connected. Make certain PTO shielding is in good condition.

Bondioli & Pavesi Driveline

 

(1) Before Each Use

(5) Before

(3) Before Each Use

Each Use

4.Input Gearbox - Add EP80W-90 gear oil, if neces- sary, to bring oil level to check plug. Gearbox capacity is 27 ozs.

40HOURS

5.Shearbolt Yoke - Apply multi-purpose grease to grease fitting. This fitting must be kept lubricated to prevent yoke from seizing.

100HOURS

6.Chain Drive - Remove chain drive shield and clean out old grease. If chain has one link or more of slack, have an authorized Bush Hog dealer resize the chain. Pack bottom of shield with multi-purpose grease to the line shown in Figure 4-1. Reinstall shield using new gasket.

Figure 4-1A Lubrication

NOTE: In some instances, sliding the yoke shield back will be necessary to conveniently lubricate the cross bearings.

EG Driveline (1) Before Each Use

(3) Before Each Use

(5) Before

Each Use

(2) Before Each Use

To remove yoke shield, depress the three tabs with a screwdriver and slide cover back.

(2) Before Each Use

Binacchi Driveline

(5)Before Each Use

(3) Before Each Use

To remove yoke shield, turn slotted head 180° with screwdriver, slide cover back.

(1) Before Each Use

Fill Line

To remove yoke shield,turn

(2) Before Each Use slotted head 90° with screwdriver, remove turn

screw and slide cover back.

(4) Before Each Use

 

 

Vented Fill Plug

 

Drain Plug

 

 

 

 

 

 

Oil Level

(6)100 Hours

 

(Under Shield)

 

 

 

Check Plug

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Bush HOG Congratulations Table of Contents Retail CUSTOMER’S Responsibility Under the Bush HOG WarrantyThis Limited Warranty Shall not Apply Disclaimer of Implied Warranties & Consequential DamagesDealer Preparation Check List Rotary TillersImportant Safety Precautions Technical Specifications Section Introduction and DescriptionIntroduction DescriptionSection Preparation for USE Attaching to TractorOffsetting Tiller Hitch Lug Dimension Clamp Bolts Frame GearboxGeneral Safety Adjusting for WorkSection Operating Instructions Section Maintenance Maintenance Check ListOperation TransportingBondioli & Pavesi Driveline Binacchi DrivelineBlade Replacement Bolt ReplacementSlip Clutch Adjustment Slip Clutch Operational CheckSection Dealer Assembly TroubleshootingTroubleshooting Exploded Assembly Safety Decals Torque Specifications Recommended Torque in Foot Pounds Newton MetersEMPLOYERS, Employees and Operations Employee Tractor Operating InstructionsThis Act Seeks Osha Regulations

RTS specifications

The Bush Hog RTS series is a standout line of rotary tillers designed for both performance and durability, making it an ideal choice for agricultural, landscaping, and gardening applications. Built to meet the demanding needs of professional landscapers and dedicated gardeners, the RTS offers several key features and advanced technologies.

One of the most noteworthy aspects of the Bush Hog RTS is its robust construction, which leads to enhanced longevity and reliability. The frame is heavily reinforced to withstand tough operating conditions, while the tiller tines are crafted from high-quality materials, ensuring they maintain their sharpness and effectiveness even after extensive use. This durability translates to lower maintenance costs and reduced downtime, crucial for maintaining productivity.

In terms of performance, the RTS series stands out with its impressive tilling depth and width capabilities. Users can achieve a maximum tilling depth that allows for effective soil aeration, promoting root growth and improving overall soil health. The width options available in the RTS lineup provide flexibility, catering to various field sizes and types of landscaping projects.

The Bush Hog RTS also incorporates advanced technology to enhance ease of use. The adjustable side runners enable users to control the tilling depth precisely, while built-in gearbox systems allow for smooth power transfer, ensuring consistent performance while reducing wear and tear on the machine.

Another significant feature is the chain-driven design that promotes efficient power usage and minimizes slippage. This results in a more reliable operation, especially in challenging soil conditions. Furthermore, the RTS series is compatible with a variety of tractor models, making it a versatile addition to any equipment fleet.

To maximize operator comfort and efficiency, the RTS features an ergonomic design, enabling easy attachment and detachment to tractors. The simple controls and straightforward operation make it accessible for users of all skill levels, reducing the learning curve for new operators.

Overall, the Bush Hog RTS rotary tillers combine strength, versatility, and innovative features, positioning them as a top choice for those looking to enhance their land management and agricultural productivity. With their superior construction and performance, the RTS series stands ready to tackle soil preparation tasks of any scale with ease and effectiveness.
Top Page Image Contents