Craftsman 917.29332 owner manual Maintenance Agreement, Product Specifications, RJ19LM

Page 4

PRODUCT SPECIFICATIONS

 

1

!

-IORSEPOWER:

6.5.HP

 

)ISPLACEMENT:

12.48 CU. IN.

 

Use the correct tools as necessary to insure proper tightness.

MAINTENANCE AGREEMENT

 

(266CO)

 

GASOLINE CAPACITY:

3 Quads

 

 

Unleaded

Regular

OIL (API-SF/SG/SH):

SAE 30

 

 

(Above 40°F)

CAPACITY: 19 oz.)

SAE5W-30/10W-30

 

(Below 40°F)

SPARK PLUG :

Champion

RJ19LM

(GAP: .030")

OR J19LM

 

Congratulations on your purchase of a Craftsman Tiller. It has been designed, en- gineered and manufactured to give you the best possible dependability and perform-

ante.

Should you experience any problem_ you

cannot easily remedy, please contact your nearest authorized Sears Service

Center/Department. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble

and maintainyour tiller properly. Always observe the SAFETY RULES.

Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely.

A Sears Maintenance Agreement is avail-

able on this product. Contact your nearest Sears store for details.

CUSTOMER RESPONSIBILITIES

Read and observe the safety rules.

Follow a regular schedule in maintain- ing, caring for and using your tiller.

Follow the instructions under the "Customer Responsibilities" and "Stor- age" sections of this Owner's Manual.

WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass covered land unless the engine's exhaust system is equipped with a spark arrcster meeting applicable local or state laws (if any). If a spark arrester is used, it should be main- tained in effective working order by the operator.

In the state of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See your Sears Authorized Service Center for spark arrester. Refer to the Repair Parts section of this manual for part number.

These accessories were available when the tiller was purchased. They are also avail- able at most Sears Retail outlets and Service Centers. Most Sears Stores can order

repair parts for you when you provide the model number of your tiller.

ENGINE

TILLER PERFORMANCE

FUR_ENERI

TILLER MAINTENANCE

BELT

TINES

SHE_R pIN

HAIRPIN CLIP

4

Image 4
Contents Craftsman SEARS, Roebuckand CO., D/817WA, Hoffman ESTATES, IL Training PreparationMaintenance and Storage OperationMaintenance Agreement Product SpecificationsRJ19LM Customer ResponsibilitiesTools Required for Assembly Operators PositionFront Left RightInstall Handle Viewed from R,H. Side of TillerConnect Shift ROD Remove Tiller from CrateCheck Tire Pressure Handle HeightMeets Ansi Safety Requirements Know Your TillerHOW USE Your Tiller StoppingTines Drive EngineTurning CultivatingOuter Side Shields To TransportTo Start Engine Tilling HintsTine Shear Pins 0101010 0101010 0101010Lubrication Chart To Service PRE-CLEANER To Service CartridgeEngine Lubrication To Change Engine OILTo Adjust Handle Height CleaningMuffler Spark PlugTire Care To Remove WheelTo Remove Belt Guard To Replace Ground Drive BeltTine Replacement Engine To Adjus T CarburetorTiller Fuel SystemEngine OIL CylindersCause ProblemCorrection Problem Cause Handles KEY Part DescriptionKEY Part MAINFRAME, Left SideDescription KEY Part Description MAINFRAME, Right SideStandardhardware - Purchaselocally Transmission KEY Part NO. NO. DescriptionTineshield Tine Assembly Decals Label KIT Ownersmanual ENGINE, Briggs & Stratton - Model Number 121432, Type no -E1 55A +++t 110 Gasket SET Carburetor Gasietset Carburetor KIT98A 493280 Screws Idle Speed 690960 Screw, Blower Housing 305B 692557 Sears