Engine | Belt Guide "A". | Clip Screw | ||
Pulley | ||||
St |
|
| Drive | Control Cable |
ud | .... |
| ||
|
| C., |
| |
sion
idler Pulley
Extension Spring | rension |
Pulley
IINE REPLACEMENT
_CAUTION: Tines are sharp. Wear
)loves or other protection when handling rines.
_,badly worn tine causes your tiller to work larder and dig more shallow. Most impor- ant, worn tines cannot chop and shred )rganic matter as effectively nor bury it as _eeply as good tines. A tine this worn leeds to be replaced.
,_ewTine
in_
°To maintain the superb tilling perfor- mance of this machine the tines should
be checked for sharpness, wear, and bending, particularly the tines which are
next to the transmission. If the gap between the tines exceeds
they should be replaced or straightened as necessary.
°New tines should be assembled. Sharp- ened tine edges will rotate rearward from above.
I I
} I
t
:ounter Tine
otation
Hairpin Clip
Sharp Egde
Sharp Edge
larp Edge
Shear Pin
Shear Pin
17